h22 machine work
#1
H is for HERO
Thread Starter
Join Date: Oct 2005
Location: VA-eastcoast
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
h22 machine work
if anyone knows the proper step to honing a h22 closed deck block could you let me know.
also what local machine shops are in the area that people use, i am in 22408 and i dont mind driving for good work! im gonna need the rotating assembly mic'd and balanced possibly assembled
also what local machine shops are in the area that people use, i am in 22408 and i dont mind driving for good work! im gonna need the rotating assembly mic'd and balanced possibly assembled
#2
Re: h22 machine work
Very few machine shops will hone FRM liners, in fact I have not came across one that will do it to this day. You can resleeve on ductile liners and then bore it to the mm you like and then hone., but I dont believe you will find any machine shop capable to do it to a stock h22 liner.
#3
H is for HERO
Thread Starter
Join Date: Oct 2005
Location: VA-eastcoast
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Re: h22 machine work
the stock liner can in fact be honed bit it takes a certain procedure...a buddy of mine informed me of a shop yesterday that can do it! they have done h22's many times
#4
Re: h22 machine work
if anyone knows the proper step to honing a h22 closed deck block could you let me know.
also what local machine shops are in the area that people use, i am in 22408 and i dont mind driving for good work! im gonna need the rotating assembly mic'd and balanced possibly assembled
also what local machine shops are in the area that people use, i am in 22408 and i dont mind driving for good work! im gonna need the rotating assembly mic'd and balanced possibly assembled
#5
Re: h22 machine work
Tommy, Try not to look on here for real technical info just call the # rich give you he will be able to answer all your ?. Get a real answer from somebody that dose it all day every day. And if rich didnt give you the # call me at shop I will get it for you.
#7
Re: h22 machine work
Yes sir, I have been using him for along time real good people. I hope he answered all your ?. And when are you stating the build. Ill have a price on the Pro series ? cams for you today. this way we can sale the other ones.
#8
H is for HERO
Thread Starter
Join Date: Oct 2005
Location: VA-eastcoast
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Re: h22 machine work
yea they answered my ?'s they also said they can do the honing as they have done them before, i also found the procedure for honing is in the helms manual. yea and let me know on the cams send me a pm on that!
Thread
Thread Starter
Forum
Replies
Last Post
mach442
Automotive Discussion
9
10-01-2008 07:14 AM