i was wondering the engine code for the zc motor(2nd gen.)cause i was wondering if i can hook up my dx tranny to it and plug my stock ecu to it.

 

a ZC is considered to be a d series engine. your tranny will bolt to it. the ecm should work also, really depends on what model your car is?

 

ZC is like a 86-89 intgra any d series transmission will bolt to it. You have a dx that means you have the dual point injection, so you will need to use another computer like an Si. 2ND Gen integras have B18A's in them. You will also need to get your car rewireing for the motor. (if you have a 88-91 Hatch)

 

its going into a 93 coupe, so what well i need to complete the swap.

 

i have never put a zc in a 5th gen civic. you may need a lh (drivers) side motor mount???? you will have to change some plugs around to get the distributor to function properly. the stock ecm should work. you could also use a 94-95 teg ls ecu also if need be. if it were me i would just use a 94-95 teg ls swap instead, more power and less complications!!!!