calisol

i was givin some and all i know is they came out a eclipse. they have a orange ring going around it. whats the cc on them and will the work with a honda motor (d16y8)? thanx

StreetRacer69

either 440cc(USDM) or 450CC(JDM, Blue) if its out of a turbo DSM, and yest they should work.

g S x

what color is the plastic at the top of it?
hondas run high impedance (saturated) injectors, DSMs run low impedance (peak and hold) injectors. To make the DSM injectors work you will have to get a fuel injector resistor box wired up to lower the impedance. dont do it unless you are boosted and have some kind of way of controlling them (ie: adjustable fuel pressure regulator +afc, hondata, ems, etc...) otherwise they are too much for what you need.

calisol

okay one of my boys looked at it and the o-ring going around it where it mounts into the intake manifold is orange. the top of it where the plug goes into is black. whats the cc and will it work????

calisol

i have a v-afc2 and a aem fuel pressure regular so that should be straight right.?.?.?

calisol

help...

gear

youre going to need a resistor box too as eclipz told you.

sk8rmike

i believe the blacktops are 440's. either get a resistor box out of an obd0 honda or preferably some inline 12v resistors from radio shack because it's a motherfucker putting a resistor box on the y8's. the injector ground plug is under the intake manifold.

Ninety7GSX

take a picture of one of the injectors so we can tell you what it is