Door locking with Viper 550ESP and Turbo timer?
Thread Starter
I <3 BOOST
Joined: Jul 2003
Posts: 2,052
Likes: 0
From: Del Rio, TX/Yorktown
Door locking with Viper 550ESP and Turbo timer?
Here's my problem: i installed my 550ESP, but since the timer keeps the car running, it will only lock in "Armed While Driving" mode and thus unarm once the car shuts off. Also, passive locking only works with the ignition off. I know there must be a way to defeat this, and prefferably being able to use the remote to lock the doors and arm the system at will. Anyone who knows the combination of codes nessecary to do so, please post up! thanks!
^avatarless
Joined: Nov 2002
Posts: 2,250
Likes: 0
From: 757
Re: Door locking with Viper 550ESP and Turbo timer?
anyone i've ever known has the same situation you have... either wait for it to shut off and arm it, or just lock the doors when you're getting out and dont use the alarm, or dont use the turbo timer unless you've been dogging it. i donno what to tell you
Banned
Joined: Nov 2002
Posts: 2,538
Likes: 0
Re: Door locking with Viper 550ESP and Turbo timer?
Originally Posted by Iceman05
dammit! i thought i had it figgured out! anyone have other suggestions?
corona connessuer
Joined: Nov 2002
Posts: 3,425
Likes: 0
From: GUAM
Re: Door locking with Viper 550ESP and Turbo timer?
Originally Posted by Iceman05
dammit! i thought i had it figgured out! anyone have other suggestions?
DUKE BLUE DEVILS
Joined: Nov 2002
Posts: 6,075
Likes: 0
From: Yorktown
Re: Door locking with Viper 550ESP and Turbo timer?
You have to wire a relay that is powered by the same signal as the ignition. When the ignition is cut (turbo timer ends it's cycle) the relay will initiate the arming of the alarm. Sounds complicated, but it's fairly easy to do.
