DA idleing problem
#1
Registered member
Thread Starter
Join Date: Sep 2006
Location: Chesapeake
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
DA idleing problem
when im driving it its fine but when i throw it in neutral comin up to a stoplight or something it revs up and down from 2k back down to 1 anyone know whats causing this?
#5
Ground Level Imports
Join Date: Aug 2006
Location: Newport News
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Re: DA idleing problem
its your TPS sensor, the sensor monitors what location the throttle is in and if that sensor goes out or is just missing or not hooked up the ecu doesnt know how to compensate the injectors for the throttle change so it just causes the idle to go up and down. when you take off it will be fine or at least seem like it when actuality you are burning alot more fuel than you think and which will actually cause you to lose horsepower. ever notice how your tank seems to empty alot faster?
#8
HollyLeuia HollaBack
Join Date: Mar 2006
Location: N.N. / VCU
Posts: 1,361
Likes: 0
Received 0 Likes
on
0 Posts
Re: DA idleing problem
FITV ! thats the problem I had with my h23. but It wouldnt hurt to clean out your IAC valve either
http://www.g2ic.com/forums/showthrea...threadid=44386
theres the write up for the FITV
http://www.g2ic.com/forums/showthrea...threadid=44386
theres the write up for the FITV
#9
Sumospeed #O.G.
Join Date: Apr 2003
Location: Va Beach
Posts: 2,514
Likes: 0
Received 0 Likes
on
0 Posts
Re: DA idleing problem
FITV ! thats the problem I had with my h23. but It wouldnt hurt to clean out your IAC valve either
http://www.g2ic.com/forums/showthrea...threadid=44386
theres the write up for the FITV
http://www.g2ic.com/forums/showthrea...threadid=44386
theres the write up for the FITV
#10
VTEC
Join Date: Nov 2004
Location: Newport news 757
Posts: 1,543
Likes: 0
Received 0 Likes
on
0 Posts
Re: DA idleing problem
OK its more than likely airpockets, a leak, or not enough coolant in your coolant system. You should pressure test ur coolant system if its not holding pressure it wont open the IAC(idle air control) valve and it will idle like that i went through this and make sure ur idle is set right