Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

A/C questions "integra"

Old Jul 24, 2008 | 04:32 PM
  #1  
89Leg2a94Teg's Avatar
Thread Starter
Registered Member
 
Joined: Nov 2007
Posts: 58
Likes: 0
89Leg2a94Teg has disabled reputation
Default A/C questions "integra"

I have a missing piece to my A/C line. To be precise its a missing piece connecting to my low pressure line.

The way my A/C works is, the low press side goes from in front of my headers down below radiator... runs up then back towards the firewall.
Then from the firewall is another tube part of the A/C. Except this one is not connected to the low press tube. It goes down and connects to the side of the radiator.

It then comes through and connects to this little canister thing. ( i forget what its called).

There are two lines that go to this canister, and they both run into the radiator i believe.

My main problem is that i have a random A/C line chilling next to my low press line but they don't match up to connect.

Check pictures to make sense of this mess.

Thank you and any ideas are appreciated.
Attached Thumbnails A/C questions "integra"-integra-017.jpg   A/C questions "integra"-integra-018.jpg   A/C questions "integra"-integra-019.jpg   A/C questions "integra"-integra-020.jpg   A/C questions "integra"-integra-021.jpg  

A/C questions "integra"-integra-022.jpg   A/C questions "integra"-integra-023.jpg  
Old Jul 24, 2008 | 08:03 PM
  #2  
89Leg2a94Teg's Avatar
Thread Starter
Registered Member
 
Joined: Nov 2007
Posts: 58
Likes: 0
89Leg2a94Teg has disabled reputation
Default Re: A/C questions "integra"

is it the compressor?
Old Jul 24, 2008 | 08:24 PM
  #3  
Sp00nisBACK's Avatar
Registered Member
 
Joined: Jul 2008
Posts: 8
Likes: 0
Sp00nisBACK has disabled reputation
Default Re: A/C questions "integra"

Originally Posted by 89Leg2a94Teg
I have a missing piece to my A/C line. To be precise its a missing piece connecting to my low pressure line.

The way my A/C works is, the low press side goes from in front of my headers down below radiator... runs up then back towards the firewall.
Then from the firewall is another tube part of the A/C. Except this one is not connected to the low press tube. It goes down and connects to the side of the radiator.

It then comes through and connects to this little canister thing. ( i forget what its called).

There are two lines that go to this canister, and they both run into the radiator i believe.

My main problem is that i have a random A/C line chilling next to my low press line but they don't match up to connect.

Check pictures to make sense of this mess.

Thank you and any ideas are appreciated.
You've got some pretty ass hands.
Old Jul 24, 2008 | 08:47 PM
  #4  
oxidejunky's Avatar
Registered Member
 
Joined: Nov 2007
Posts: 720
Likes: 0
oxidejunky has disabled reputation
Default Re: A/C questions "integra"

the line in picture 2 looks like it goes to ur condenser. which is in front of ur radiator or to the highs side port on the compressor From what i can tell i didnt even see a compressor on the motor. in pic one there is a line that runs from the compressor's low side port to the line in ur hand and it not there. How much of the a/c system is in the car?
Old Jul 24, 2008 | 10:03 PM
  #5  
89Leg2a94Teg's Avatar
Thread Starter
Registered Member
 
Joined: Nov 2007
Posts: 58
Likes: 0
89Leg2a94Teg has disabled reputation
Default Re: A/C questions "integra"

Originally Posted by oxidejunky
the line in picture 2 looks like it goes to ur condenser. which is in front of ur radiator or to the highs side port on the compressor From what i can tell i didnt even see a compressor on the motor. in pic one there is a line that runs from the compressor's low side port to the line in ur hand and it not there. How much of the a/c system is in the car?
To be honest im not very knowledgeable about the A/C system.
To my knowledge there is a condenser in picture 3. The high hooks up to that, then comes back out and goes to the radiator. I think im missing the compressor. I guess it hooks up to the low end and that one mystery piece in picture 2. Where does the compressor go? and are their lines that go from the low side and the 2nd picture line to the compressor?

Thank you
Old Jul 25, 2008 | 09:41 AM
  #6  
shad's Avatar
Registered Member
 
Joined: Jul 2008
Posts: 4
Likes: 0
shad has disabled reputation
Default Re: A/C questions "integra"

the car is missing the compressor but has the condensor. the missin piece is you low side line that goes into the back of the compressor. (by the way the round thing is your accumalotor drier)
Old Jul 25, 2008 | 04:17 PM
  #7  
Axel kain's Avatar
Registered member
 
Joined: Jun 2008
Posts: 141
Likes: 0
From: King and Queen
Axel kain has disabled reputation
Default Re: A/C questions "integra"

it would be alot easier to tell you if i could see it in person.
Old Jul 25, 2008 | 07:00 PM
  #8  
kaltares's Avatar
CustomGSR
 
Joined: Jan 2004
Posts: 1,144
Likes: 0
From: 757
kaltares is an unknown quantity at this point
Default Re: A/C questions "integra"

I have all the lines under the hood lmk if u need them
Old Jul 25, 2008 | 07:13 PM
  #9  
DeFunk's Avatar
︻╦╤─
 
Joined: Dec 2006
Posts: 937
Likes: 0
From: Va Beach
DeFunk DeFunk DeFunk DeFunk DeFunk DeFunk DeFunk DeFunk DeFunk DeFunk DeFunk
Default Re: A/C questions "integra"

Looks like you need a compressor line, condenser and a dryer. I can't tell in the pictures if you have a compressor or not.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ufctapout
757
17
Feb 14, 2009 09:30 AM
DRZPLAYBOY19
Import - ASIA
10
Jun 16, 2008 07:04 AM
kf91da9
Parts ARCHIVE
9
Dec 7, 2007 08:33 AM
TazZ99CiviC
Tech Talk
5
Mar 6, 2007 12:10 PM
ZweetdreamZ
Automotive Discussion
16
Nov 5, 2003 11:44 AM



All times are GMT -8. The time now is 06:03 AM.