Best way to get bolt out?
#1
Registered Member
Thread Starter
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
Best way to get bolt out?
Hey, I was going to take the rear suspension fork off to do my springs and i cracked the head off one of the bolts the bolts the fork down at the bottom, it's a 95 civic lx. Let me know guys.
#2
Iridium V
Join Date: Nov 2002
Location: Newport News, VA
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best way to get bolt out?
You're probably going to have to drill, be carefull to drill using a proper sized bit and drill parallel so you don't damae the fork. If any damage is done to the fork it can be replaced or you can re-thread.
#5
Re: Best way to get bolt out?
Use an EZ-Out. Drill small hole, then reverse drill with ez-out bit and bolt should come out. If you have access to a torch then do what mike said, alot easier.
#8
HM-8404
Re: Best way to get bolt out?
Originally Posted by 00civichatch
buy some aftermarket lca's and new struts and call it a day.
Thread
Thread Starter
Forum
Replies
Last Post
rydnlow1120
Other ARCHIVE
0
12-05-2007 05:02 PM