I bought a b series cm fx300 clutch for my car. (current one is slipping) It is a 1995 Integra GSR turbo. I am going to put the clutch in tommorow and the guy i bought it from just told me that it was out of his b16 crx with cable tranny. WILL THIS CLUTCH WORK???????

THANK YOU VERY MUCH!

-Andrew

 

nope. i think the pressure plate is different, the clutch plate may work.

 

cable clutch != hydro clutch

 

no

 

well its the disc that im having a problem with. the pressure plate fits the flywheel perfect.! Im in Virginia Beach. Does anyone know where I can get a clutch today or tommorow!

thanks

 

Bap Geon or even Advance Auto. I know Advance carries stage 1 and 2 clutches made by Luk.

 

nope backwards. and maybe

here is the rundown
90-91 B series use a small spline input shaft/clutch
92-93 B series are still cable clutch, but use a bigger Hydro size input shaft/clutch.

If the clutch disc isnt sliding on easy, is not going to work. dont force it.

 

well how will u know if the clutch from b16 came from 90-91 or 92-93?

 

As stated before, the earlier years use a smaller input shaft spline therefore the clutch disc will have a smaller hole. The 92-93 models are larger, the same size as late model B-series hydro's. I don't know the exact demensions, but if it doesn't slide on with relative ease, it's obviously not the correct one.


My .02, buy a new one for your car so you'll know if it's going to fit or not. If you don't know much about parts and such, why waste money on something you're not sure is going to fit?