civickid03

Got my b16 head back from teh machine shop only to notice that out of all 3
rocker arms, only 2 move together...am I missing an additional gator pin? all of the vtec
"pins/pistons" are there its just the 3rd rocker arm moves independent on all cylinders, not sure if this is how its supposed to be or not, i was under the impression that all 3 rockers should be held in place by pins...is there only 1 pin or 2? i am not talking about the VTEC pins/pistons i am talking about the small gator pin that keeps the rockers in place. heres some pictures




two rockers moving togehter.



moves independent?? sort of 'snaps' in place if i push the vtec piston/pin in...

Fabrik8

I think there's a cylinder head and someone's hand in the picture. It's hard to tell anything else.

DORKO

yeah those pictures definitely suck cow asshole.

DORKO

and im pretty sure they all move seperatly.

Because when i do headwork i take tie wraps and lift them all up and wrap them together so they aren't in the way.

ive had tie wraps break on me, and 1 rocker fall down and get in my way.

civickid03

sorry about the pix...2 of the rockers definitely move together because of the 'gator' pin i am talking about..i dont think the 3rd one has this pin from waht u just said, thanks for the input.

i think i am just buggin out, can anyone confirm this lol

civickid03

ok i was buggin out, got the info i needed...please delete

thx