b16 in a crx
08-28-2005, 06:31 AM
#4
Team Ultraspeed
Join Date: Nov 2002
Location: Nonya (hint: VaBch)
Posts: 1,148
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 in a crx
Yes, you will need the for mentioned Hasport bracket, or find an old Place Racing one.
The only other thing that you can do (and I just did one to an EG) is use the B series bracket with an integra compressor, and cut the ends off the lines from the Integra compressor and have them welded to the ends of the CRX's lines. Works great and only cost $30 to be welded at Abacus. If any questions, just ask or see Chuck at Abacus, he'll know what to do.
The only other thing that you can do (and I just did one to an EG) is use the B series bracket with an integra compressor, and cut the ends off the lines from the Integra compressor and have them welded to the ends of the CRX's lines. Works great and only cost $30 to be welded at Abacus. If any questions, just ask or see Chuck at Abacus, he'll know what to do.
