According2Me

Got a 99-00 coupe with a f20b in it with accord long gear tranny. Not sure what halfshaft and axles are in it since someone else swapped it prior to me having it. But since lowering when turning puts axles in a bind. Running the hasport mounts read on different forum about these mounts sitting it too far back or too much of angle which causes the bind when lowered. But any of the H series ppl on here know what halfshaft/axle combo to run lowered? I've heard people using accord halfshaft then running 90-91 integra axles but I'm not a H series guy b series all day lol. Thanks for any help and smartass remarks ahead of time

83Stang5.0

the accord halfshaft and then the integra axles should fix your issue. 1 from a DA and the other from a DC should do it. you're most likely running the prelude halfshaft. should only be an EM1 issue though, never ran into it using normal prelude halfshaft in h22 EG

http://honda-tech.com/showthread.php?t=3014069

According2Me

Yea I've read that and bunch of other theories just figured someone up here has had to do it before, thanks for info

83Stang5.0

hasport mounts and axles with prelude halfshaft causes 0 issues in EG for me, so can I say for certain what your issue is? No.

Just what I found with the most commonly agreed on answer with people encountering the same problem.