Auto to Manual
#1
Registered Member
Thread Starter
Join Date: May 2003
Location: L'Burg
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
Auto to Manual
I am working on converting a automatic civic that we just got tonight to a 5spd. what all do i need besides the obvious tranny and pedal assembly? I really need a list of all parts that I need to make this work..kinda like a check list
#2
Bitches get Stitches
Join Date: Mar 2003
Location: Chesapeake
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Re: Auto to Manual
pedal assembly
clutch master cylinder
hard lines from the clutch cylinder to the slave
slave cylinder
shift fork
TO bearing and pilot bearing
clutch/flywheel
tranny
that should be about it. you will also need the 5 speed rear transmission bracket. i have a lot of this shit and i'll sell it for cheap if you want to pick it up.
clutch master cylinder
hard lines from the clutch cylinder to the slave
slave cylinder
shift fork
TO bearing and pilot bearing
clutch/flywheel
tranny
that should be about it. you will also need the 5 speed rear transmission bracket. i have a lot of this shit and i'll sell it for cheap if you want to pick it up.
#3
Registered Member
Thread Starter
Join Date: May 2003
Location: L'Burg
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
Re: Auto to Manual
Originally Posted by sk8rmike
pedal assembly
clutch master cylinder
hard lines from the clutch cylinder to the slave
slave cylinder
shift fork
TO bearing and pilot bearing
clutch/flywheel
tranny
that should be about it. you will also need the 5 speed rear transmission bracket. i have a lot of this shit and i'll sell it for cheap if you want to pick it up.
clutch master cylinder
hard lines from the clutch cylinder to the slave
slave cylinder
shift fork
TO bearing and pilot bearing
clutch/flywheel
tranny
that should be about it. you will also need the 5 speed rear transmission bracket. i have a lot of this shit and i'll sell it for cheap if you want to pick it up.
#4
Speak&Spell Anyone?
Join Date: Jan 2003
Location: York County
Posts: 2,586
Likes: 0
Received 0 Likes
on
0 Posts
Re: Auto to Manual
you also have to get a special mount from hasport or anyother mount company for the passenger side tranny mount. just for some advise. by the way i am still looking for something for you
#6
Registered Member
Join Date: Jan 2003
Location: va beach
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Re: Auto to Manual
Originally Posted by ZC4ME
you also have to get a special mount from hasport or anyother mount company for the passenger side tranny mount. just for some advise. by the way i am still looking for something for you
#7
Bitches get Stitches
Join Date: Mar 2003
Location: Chesapeake
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Re: Auto to Manual
oh yeah i forgot the linkage. here is all the shit i have if you want to come buy it
rear mount
tranny mount
shift linkage
d16z6 transmission
shift fork
flywheel
i'll sell you all that for 150 if you come get it.
rear mount
tranny mount
shift linkage
d16z6 transmission
shift fork
flywheel
i'll sell you all that for 150 if you come get it.
#10
卐 Walnuts
Join Date: Nov 2002
Location: Compton, Ca W
Posts: 29,360
Likes: 0
Received 0 Likes
on
0 Posts
Re: Auto to Manual
also depending on the year..if its a 96-00 civic you can use the stock mounts still, if its a 92-95 civc your going to have to cut/relocate/weld the passenger side tranny mount or your going to have to buy the hasport auto to manual mount, it will cost about the same..i also have the tranny/clutch/to bearing/fly wheel..i prolly also have the clutch slave and lines for the 1.6