RotaryX7

Alright, my new OEM fender came in since my other one cracked and got a big hole in it (damn plastic). Anyways, I was taking off the old fender off and I got all the bolts and screws out, till I got to this one. I can not get at it, nothing will fit. I tried everything, open end wrench and all. I was just wondering if anyone of you know the best way to get at this bolt and get it off.

Heres what Im dealing with






P.s - I know I need a new backing plate, rotor, and caliper. The upper control arm is starting to turn its age also. Its an 84' what can I say, its been sitting for a 1 1/2 befor I got it.

RPRacing

that piece does not slide forward? On my 92 integra, i had a rail type piece that let me loosen everything and just slide the bumper cover on rails similar to what that looks like

MaxPower

Are you keeping the old bumper? If not , start cutting and ripping.

RotaryX7

I am keeping the bumper. I only had 30 mins today to do it befor I had to go. I mainly just wanted to take it off so I can finish it tonight or tommorow morning. I am going to try an Box end, It looked like I could just pull it over but I didnt want to break it. I will try sliding it also. thanks for the help. This is the hardest time ive ever had in taking off fenders/bumpers. Then agian, I only had like 30 mins.

krazdracer

we had the same problem we just ended up grnding it off with a dremel and replacing it with stainless steel bolts

RotaryX7

I got it off this morning. I just Slided the bumper off and then got the bolt off. Pretty simple.

RPRacing

excellent. good to hear.