240sx steering rack
#2
Lost Cat Magnet
Join Date: Jun 2003
Location: raleigh, nc
Posts: 758
Likes: 0
Received 0 Likes
on
0 Posts
Re: 240sx steering rack
the hardest part is lining everything back up. overall, very easy. just some tight spots under the dash.
remove tie rod ends from spindle
remove the 2 brackets that hold rack to chassis (4x17mm iirc from underneath)
remove the 14mm bolts that hold the steering column to the dash
remove 3 10mm bolts that hold the rubber/metal boot at the firewall (conects to steering rack)
loosen 12mm column/rack joint (make marks that way you can determine the ~ location when replacing it.
remove rack.
make dinner
remove tie rod ends from spindle
remove the 2 brackets that hold rack to chassis (4x17mm iirc from underneath)
remove the 14mm bolts that hold the steering column to the dash
remove 3 10mm bolts that hold the rubber/metal boot at the firewall (conects to steering rack)
loosen 12mm column/rack joint (make marks that way you can determine the ~ location when replacing it.
remove rack.
make dinner
#5
psycho jungle cat
Join Date: Aug 2003
Location: 757/910
Posts: 7,124
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post