Notices
Cycle Corner Running with two less wheels than everyone else? This forum is for you.

High idle problem

Thread Tools
 
Old Dec 25, 2007 | 11:44 AM
  #1  
TheMx3's Avatar
Thread Starter
Registered Member
 
Joined: Feb 2003
Posts: 546
Likes: 0
From: 757 area
TheMx3 is an unknown quantity at this point
Default High idle problem

Well i washed and waxed the bike today and then ate chistmas dinner. Went to go start the bike and it only wants to idle at 4500. I cant figure it out. I watched the Throttle and it seemed to be working properly. Any ideas?
Old Dec 25, 2007 | 01:42 PM
  #2  
TheMx3's Avatar
Thread Starter
Registered Member
 
Joined: Feb 2003
Posts: 546
Likes: 0
From: 757 area
TheMx3 is an unknown quantity at this point
Default Re: High idle problem

So i took of the tank and found out the peace that connects the choke cable to the carbs is not returning when i unchoke it. Tryed to lube it up still wont return. I have to use a screwdriver and wedge it back to non choke mode. any idea what i need to replace?
Old Dec 25, 2007 | 02:29 PM
  #3  
TheMx3's Avatar
Thread Starter
Registered Member
 
Joined: Feb 2003
Posts: 546
Likes: 0
From: 757 area
TheMx3 is an unknown quantity at this point
Default Re: High idle problem

upon further inspection it seems the cable is frayed on the section thats actually in the little thumb switch for adjusting the choke it self. Disconnected the cable from the choke valve selector how do i get it off the handle bar so i can replace it. Cant seem to figure out how it detaches.
Old Dec 25, 2007 | 05:41 PM
  #4  
Kells<3's Bikes's Avatar
单身的 and loving it :)
 
Joined: Sep 2007
Posts: 497
Likes: 0
Kells<3's Bikes is on a distinguished road
Default Re: High idle problem

You need a new cable...of course...what kind of bike so i can have a better idea on how to help ya!

Kellie
Old Dec 25, 2007 | 07:16 PM
  #5  
TheMx3's Avatar
Thread Starter
Registered Member
 
Joined: Feb 2003
Posts: 546
Likes: 0
From: 757 area
TheMx3 is an unknown quantity at this point
Default Re: High idle problem

Sorry about that,Suzuki 1995 rf600
Old Dec 26, 2007 | 10:14 AM
  #6  
Kells<3's Bikes's Avatar
单身的 and loving it :)
 
Joined: Sep 2007
Posts: 497
Likes: 0
Kells<3's Bikes is on a distinguished road
Default Re: High idle problem

You just need to take the control housing apart. There should be 2 phillips screws holding it together. If you are still having trouble you can always bring it to us! We pick up too!

Kellie
Old Dec 26, 2007 | 10:17 AM
  #7  
TheMx3's Avatar
Thread Starter
Registered Member
 
Joined: Feb 2003
Posts: 546
Likes: 0
From: 757 area
TheMx3 is an unknown quantity at this point
Default Re: High idle problem

Hey thanx alot, got it all done even rigged it so i can control the choke till my new cable comes in. Thanx again! If i need anything major done you know who im coming too : )
Old Dec 31, 2007 | 07:53 AM
  #8  
Kells<3's Bikes's Avatar
单身的 and loving it :)
 
Joined: Sep 2007
Posts: 497
Likes: 0
Kells<3's Bikes is on a distinguished road
Default Re: High idle problem

Sounds Great!
Old Dec 31, 2007 | 07:56 AM
  #9  
TheGentleArt's Avatar
DA LEPRAHKAHNZ GOLLD
 
Joined: Sep 2003
Posts: 5,423
Likes: 0
From: Newport News
TheGentleArt TheGentleArt TheGentleArt TheGentleArt TheGentleArt TheGentleArt TheGentleArt TheGentleArt TheGentleArt TheGentleArt TheGentleArt
Default Re: High idle problem

EMC like always yo!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
8====D
Tech Talk
18
Feb 26, 2009 06:00 PM
8====D
Tech Talk
9
Feb 25, 2009 10:10 PM
JBub
Tech Talk
10
Jun 3, 2008 02:03 PM
sikkcrx
Tech Talk
10
Apr 11, 2007 09:43 AM
j4k3
Tech Talk
3
Mar 7, 2007 01:38 AM




All times are GMT -8. The time now is 05:43 AM.