All,
My bad for those of you that have been trying to contact me, but I have been crazy busy at work.

Still have 2 B16 heads, I will include a brand new set of bronze valve guides from Supertech. I was going to install in my current B16 head, but can't be without my car for two weeks. That's how long the shop needs to keep my head to press these new guides in so my loss in your gain. The USDM and a type R (PR3-1 and PR3-3) both are going for $250 or OBO. The USDM is partly bare, it will have stock springs, retainers, valves(will need keepers and seats which you can also get from Supertech for like $80 total). The type R is complete but has 2 bent valves, can use the USDM for a swap. The USDM head will not have dizzy, Vtec 'noid, but will come with one intake mani. The Type R will have everything but the mani and dizzy. The intake is going for $150 by itself, but will include with one of the heads no charge. I have Blox cams with AEM tru timing gears all for $150. Looking at the pics below, I'm also selling B16 Eagle crank that just came back from the machine shop ready to install. It is stock dimensions but upgrades displacement from 1.6 to 1.75 liters, will go to 1.9 with 84mm bore. This is going for $150.

H22 engine mounts from Yonaka Racing for swaps into a 92-95 civic or 94-01 integra. $50


Last but not least, hate to sell but must go, Garrett Ball bearing Turbo, custom made never used, can push up to 600+ HP with right set up.. $600 firm.. can't go any lower, I bought this turbo for $1740,












If you interested text me at 703-244-3249 and I'll text or give you a call as soon as possible.