F/S:B16 heads, intake mani, cams, Garrett turbo, etc...
Thread Starter
WidestEK
Joined: Mar 2008
Posts: 26
Likes: 0
F/S:B16 heads, intake mani, cams, Garrett turbo, etc...
To All,
My bad for those of you that have been trying to contact me, but I have been crazy busy at work.
Still have 2 B16 heads, I will include a brand new set of bronze valve guides from Supertech. I was going to install in my curren B16 head, but can't be without my car for two weeks. That's how long the shop needs to keep my head to press these new guides in so my loss in your. The USDM and a type R (PR3-1 and PR3-3) both are going for $250 or OBO. The USDM is partly bare, it will have stock springs, retainers, valves(will need keepers and seats which you can also get from Supertech for like $80 total). The type R is complete but has 2 bent valves, can use the USDM for a swap. The USDM head will not have dizzy, Vtec 'noid, but will come with one intake mani. The Type R will have everything but the mani and dizzy. The intake is going for $150 by itself, but will include with one of the heads no charge. I have Blox cams with AEM tru timing gears all for $150. Looking at the pics below, I'm also selling B16 Eagle crank that just came back from the machine shop ready to install. It is stock dimensions but upgrades displacement from 1.6 to 1.75 liters, will go to 1.9 with 84mm bore. This is going for $150.
H22 engine mounts from Yonaka Racing for swaps into a 92-95 civic or 94-01 integra. $50
Last but not least, hate to sell but must go, Garrett Ball bearing Turbo, custom made never used, can push up to 600+ HP with right set up.. $600 firm.. can't go any lower, I bought this turbo for $1740,
If you interested text me at 703-244-3249 and I'll text or give you a call as soon as possible.
My bad for those of you that have been trying to contact me, but I have been crazy busy at work.
Still have 2 B16 heads, I will include a brand new set of bronze valve guides from Supertech. I was going to install in my curren B16 head, but can't be without my car for two weeks. That's how long the shop needs to keep my head to press these new guides in so my loss in your. The USDM and a type R (PR3-1 and PR3-3) both are going for $250 or OBO. The USDM is partly bare, it will have stock springs, retainers, valves(will need keepers and seats which you can also get from Supertech for like $80 total). The type R is complete but has 2 bent valves, can use the USDM for a swap. The USDM head will not have dizzy, Vtec 'noid, but will come with one intake mani. The Type R will have everything but the mani and dizzy. The intake is going for $150 by itself, but will include with one of the heads no charge. I have Blox cams with AEM tru timing gears all for $150. Looking at the pics below, I'm also selling B16 Eagle crank that just came back from the machine shop ready to install. It is stock dimensions but upgrades displacement from 1.6 to 1.75 liters, will go to 1.9 with 84mm bore. This is going for $150.
H22 engine mounts from Yonaka Racing for swaps into a 92-95 civic or 94-01 integra. $50
Last but not least, hate to sell but must go, Garrett Ball bearing Turbo, custom made never used, can push up to 600+ HP with right set up.. $600 firm.. can't go any lower, I bought this turbo for $1740,
If you interested text me at 703-244-3249 and I'll text or give you a call as soon as possible.
Last edited by anotherrican; Dec 9, 2008 at 01:17 PM.
Registered Member
Joined: Jul 2008
Posts: 26
Likes: 0
Re: F/S:B16 heads, intake mani, cams, Garrett turbo, etc...
Im interested in some of the things you have hit me up at Capeace112@yahoo.com send pics and a number
Thread Starter
WidestEK
Joined: Mar 2008
Posts: 26
Likes: 0
Re: F/S:B16 heads, intake mani, cams, Garrett turbo, etc...
All ,
My bad, my internet has been down for a minute and just got back from vaca, I'll hit you all up and reply to your PMs, I still have everything so if you hit me up with a good price we can make a deal
My bad, my internet has been down for a minute and just got back from vaca, I'll hit you all up and reply to your PMs, I still have everything so if you hit me up with a good price we can make a deal
Registered Member
Joined: Jun 2008
Posts: 615
Likes: 0
Re: F/S:B16 heads, intake mani, cams, Garrett turbo, etc...
hey man sorry to sound impatient but am really in need of these cams and gears cuz i am currently building my motor please give me a call or a text at 757-812-3720