ok guys i have a 1991 ford ranger..its only 2wd and its only a 4cylinder(hehe yea no flame plz) but i want to lift it atleast 3 inches(or more if its cheap) and your probably wondering why am i lifting a 2wd truck. Well becuase i plan on using this truck to haul a jetski around and i want to be able to easily put the whole jetski into the water without getting my truck wet..(and i just like the looks of a lifted truck) but anyways i would appreciate it if someone would show me a website or something of that nature..

 

you want to do a body or sup?

 

http://www.suspensionconnection.com/...con/70033.html

 

suspension

 

does it really matter if i buy a suspension lift listed for a 4x4 if my car is 2wd?

 

yo... go to ebay... get a 3inch body lift for like $100... you can get like a 6 inch suspension for like $800.... so there.. for $900... you can get 9inches..

 

Ok i have a 2wd ranger and I have helped many friends lift both 2wd and 4wd trucks, the cheapest way to lift your truck would be a 3in body lift, but that prolly wont get you as high as you are wanting beyond that you can get an expensive suspension lift or you can get 2 in add a leaves for the rear and lift coils for the front for an extra 2 in of lift, combined with the body lift thats 5in and will prolly give you enough room for 33's with the right off set on the rims.

go to offroadrangers.com and to rangerpowersports.com they have lots of info on this stuff.

 

oh and yeah it makes a big differance in the lift from 4wd to 2wd don't buy a 4wd lift

 

i have a 99 ranger lifted 4 inches on 33x12.50s but ive worked on my buddys 90 ranger the cheepest is for sure a body lift id go with the perofrmance accesories because it comes with all the brqckets youl need if you want suspension or just want more than the body will give you procomp makes a lift for that truck or like the one guy said coil spaces and add-a-leafs work like a charm

 

Can you do a shakle flip in a ranger like f150's and broncos? THAT would be cheap for a usually 2" rear suspension lift. Then get a set of front coils to level it out.