Redoing my ws6 trans am.
Thread Starter
DEAD OR ALIVE
Joined: Mar 2006
Posts: 2,775
Likes: 0
From: new kent.....
Re: Redoing my ws6 trans am.
it was built by jim at transfoemace .it has a hardened input shaft also 3 Alto Red Eagle Power Packs for 1st, 2nd and 3rd, Blue Plats Special clutches and steels for overdrive and the overrun clutches a Transgo stage 3 Quadzilla Shift Kit. 34 element sprag. oversize black Kevlar band . rossler tranbrake and moroso pan.
i still need you to do the rear bogarts and a dash pad.
i still need you to do the rear bogarts and a dash pad.
Registered Member
Joined: Aug 2005
Posts: 1,751
Likes: 0
the baddest assed
Joined: Dec 2003
Posts: 1,122
Likes: 0
From: Richmond VA
Re: Redoing my ws6 trans am.
hey what am i leaving out to finish this ride?
to get it running and driving
-dash pad put in
-finish shifter / center console install
-top end of engine assembly, acessories and all wiring
-bleed and check for brake leaks from abs delete
-electrical and plumbing to transmission
-fluid fill, initial start up and gremlin chasing
deluxe version (add)
-battery relocation
-wire trans brake, misc gauges
-nitrous system installation and electrical test
-clean up and detail
-upgrade the fuel system to twin pumps, run -8 to the rails
-mount the wheels and tires
-weld on the rear drag bar
-roll bar install
i know a guy who wants to make you an offer to complete the labor in any case
to get it running and driving
-dash pad put in
-finish shifter / center console install
-top end of engine assembly, acessories and all wiring
-bleed and check for brake leaks from abs delete
-electrical and plumbing to transmission
-fluid fill, initial start up and gremlin chasing
deluxe version (add)
-battery relocation
-wire trans brake, misc gauges
-nitrous system installation and electrical test
-clean up and detail
-upgrade the fuel system to twin pumps, run -8 to the rails
-mount the wheels and tires
-weld on the rear drag bar
-roll bar install
i know a guy who wants to make you an offer to complete the labor in any case
Registered Member
Joined: Jul 2004
Posts: 563
Likes: 0
From: M'Ville
Re: Redoing my ws6 trans am.
hey what am i leaving out to finish this ride?
to get it running and driving
-dash pad put in
-finish shifter / center console install
-top end of engine assembly, acessories and all wiring
-bleed and check for brake leaks from abs delete
-electrical and plumbing to transmission
-fluid fill, initial start up and gremlin chasing
deluxe version (add)
-battery relocation
-wire trans brake, misc gauges
-nitrous system installation and electrical test
-clean up and detail
-upgrade the fuel system to twin pumps, run -8 to the rails
-mount the wheels and tires
-weld on the rear drag bar
-roll bar install
i know a guy who wants to make you an offer to complete the labor in any case
to get it running and driving
-dash pad put in
-finish shifter / center console install
-top end of engine assembly, acessories and all wiring
-bleed and check for brake leaks from abs delete
-electrical and plumbing to transmission
-fluid fill, initial start up and gremlin chasing
deluxe version (add)
-battery relocation
-wire trans brake, misc gauges
-nitrous system installation and electrical test
-clean up and detail
-upgrade the fuel system to twin pumps, run -8 to the rails
-mount the wheels and tires
-weld on the rear drag bar
-roll bar install
i know a guy who wants to make you an offer to complete the labor in any case