Timing advance ?
#1
Standartenführer
Thread Starter
Join Date: Aug 2007
Location: VA Beach
Posts: 894
Likes: 0
Received 0 Likes
on
0 Posts
Timing advance ?
Here is a dumb question - from what I was able to gather it takes a $3000 system called Consult to adjust my ignition timing. Hall Nissan being a true stealership wants $115 for 2 min flash. Is there anywhere else in HR I can go to get that done ?
#4
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: Timing advance ?
See if Jim Wolf Technology has anything that can help you out, they do a lot of Nissan reflashing. I'm not really up on my Nissan ECU stuff, but you used to be able to get aftermarket Consult-type interfaces for cheap to be able to do stuff like this. I'm not sure if the later model cars are able to be used with those though. Any Nissan people care to lend a hint?
#5
(757)236-6935
Join Date: Dec 2007
Location: newport news
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Re: Timing advance ?
im a toyota mastertech personally but iirc, the 02 altima is a COP ignition setup right? you can actually adjust your timing with nothing more than a MSD 6a, rpm switch, and a timing light. you can advance up to 13 degrees and retard up to 6 degrees of base timing and tune your advance with rpm increase and MAP readings. very awesome stuff here.
#6
Standartenführer
Thread Starter
Join Date: Aug 2007
Location: VA Beach
Posts: 894
Likes: 0
Received 0 Likes
on
0 Posts
Re: Timing advance ?
OK, I recently got greddy e-manage piggy back with ignition harness among others, still waiting on software. Could you please translate what you meant by MSD6a, switch and light ? What would I need to buy ? To my knowledge the only way to get it done was through Nissan's Consult which uses a standard ODB2 port under my steering wheel but its able to read and write directly to the ECU.
#7
VR-4ever
Join Date: Jul 2003
Location: not in russia.
Posts: 11,708
Likes: 0
Received 0 Likes
on
0 Posts
#8
Re: Timing advance ?
It only takes a couple of seconds.
edit: well I got curious, here is a nice program as long as you have a laptop. http://www.blazt.biz/
Last edited by MaxPower; 12-28-2007 at 07:32 AM.
#9
Standartenführer
Thread Starter
Join Date: Aug 2007
Location: VA Beach
Posts: 894
Likes: 0
Received 0 Likes
on
0 Posts
Re: Timing advance ?
Hmm.. btw BLazt doesnt work for my car, already looked into it. Its either Consult($100 fee wasted), e-manage piggyback ($300) or Technosquare re-flash ($500)
http://www.google.com/search?hl=en&q=msd+6a - $200
http://www.google.com/search?hl=en&q=rpm+switch - $150
http://www.google.com/search?hl=en&q=timing+light - $30
Doesnt sound like a viable use of $$$
http://www.google.com/search?hl=en&q=msd+6a - $200
http://www.google.com/search?hl=en&q=rpm+switch - $150
http://www.google.com/search?hl=en&q=timing+light - $30
Doesnt sound like a viable use of $$$
Last edited by euthorus; 12-28-2007 at 08:33 AM.
Thread
Thread Starter
Forum
Replies
Last Post
oxsleeperxo
Parts ARCHIVE
5
05-15-2008 03:38 PM