How hard is it to swap a v8 like a 302 into a corolla like the eng mounts and trans mouts will i have to fabri new mount what will i need to do help!!!

 

You will have to take an English class first, and then you will have to fabricate everything.

 

+1

 

Some of the best fabricators i have met, couldn't spell their own names.....last i checked English has nothing to do with fab. work.

To answer the OP's question... IIRC there is a company that makes mounts for V8's in the older jap cars (they still weld in), although making the mounts wouldn't be all that bad either. If you stay carb'd all you have to do is mounts, you still have the drive-shaft and the rear to worry about.

 

The company you are refering to is likely JTR, Jags That Run (haha), but they make Chevy small block swap kits for the 240z/260Z/280Z, various Volvos, XJ Jaguars, and S10s. They don't produce a Corolla swap.
http://www.jagsthatrun.com/

I imagine this would be a pretty straight forward install for someone whose got the experience in such things but if you've gotta ask then you probably can't do it.

Here is a Corolla with an HSV LS1


Here is a 1986 Corolla with a Toyota 1UZ

 

thanx

 

that last one isn't an 86

 

Check this site out

http://www.jakebreyck.com/Projects/corolla/