Bad Vibration
#1
EVIL-LS1
Thread Starter
Join Date: Sep 2004
Location: Fredericksburg,Virginia
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Bad Vibration
I have a 94 Z28 that has a bad vibration I can be going down the road at 45-50mph in drive and it will start vibrating. When I shift it in overdrive It will stop till you hit around 60-65mph It will start again.any info will be helpful
Thanks jimmy.
Thanks jimmy.
#3
EVIL-LS1
Thread Starter
Join Date: Sep 2004
Location: Fredericksburg,Virginia
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bad Vibration
It feels like it gonna fall apart and the vibration feels like its where the gear shifter is makes you feel like its the trans but it shifts fine and dont slip none.
#4
Re: Bad Vibration
Tranny mount?
Check the stuff that SiExtreme said too because it could very well be one of those two, but if it was wheels then it wouldn't be there then go way then come back. Check your u-joints.
Check the stuff that SiExtreme said too because it could very well be one of those two, but if it was wheels then it wouldn't be there then go way then come back. Check your u-joints.
#7
EVIL-LS1
Thread Starter
Join Date: Sep 2004
Location: Fredericksburg,Virginia
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bad Vibration
Originally Posted by Digger70chall
mopar#1 cruising around in a chevy?
now i gotta sell mine for an integra, sheez
now i gotta sell mine for an integra, sheez
Last edited by mopar#1; 03-28-2005 at 07:48 AM.
#9
Registered member
Join Date: Sep 2003
Location: Oahu, HI
Posts: 4,781
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bad Vibration
Originally Posted by mopar#1
My chevy is for a everday driver and a streetracer to.The Mopar is if sumone beats the Z then I will go home and get the MOPAR.
ah that sounds more like it
i would use a Z as a beater car too!
#10
EVIL-LS1
Thread Starter
Join Date: Sep 2004
Location: Fredericksburg,Virginia
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bad Vibration
I worked on it today and I tryed the tourge conveter bolts and they was tight and I checked the motor mounts they where tight. I checked the trans mount and it was loose and I rasied the rear up and looked at the driveshaft and it looked like it had a wipple in it. does that mean that the driveshaft is unblanced.
I drove the car and vibration isn't as bad and I put it in nutaul and the vibration went away.
I drove the car and vibration isn't as bad and I put it in nutaul and the vibration went away.