Notices
Wheels / Tires Examples: Rims, Tires, Lug Nuts, etc.

Want to trade for some ls meshes

Thread Tools
 
Old May 24, 2009 | 02:59 PM
  #1  
importfanatic's Avatar
Thread Starter
Grippin the Grain
 
Joined: Jan 2008
Posts: 610
Likes: 0
From: The R
importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic
Default 17's for trade for smaller size

Ree
Powhatan
804-580-1218 leave a message if I don't answer or pm.

Alright people. I have a set of 17" wheels with tires that I wanna get rid of. I want a wheel that can accept a "taller" tire. I have a weird suspension setup and I'm thinking that a smaller rim with a bigger profile tire will dampen my ride a little bit. Anyways, they are kinda like a 5Zigen knockoff set. They had stickers on them but I removed them so that would look suitable and not ricey, so there's a little bit of glue on there that I never got around to removing. Tires are in good condition, about 70% tread left. I also have two spare tires of the same size with about 80% tread left on them. No serious damage to any of the wheels besides one rim is slightly bent. It's not bent bad and doesn't seem to be affecting the balance, I even have it on the front and I don't feel a vibration or anything. And last but not least, the paint is beginning to chip on one rim as well, not extreme chipping, but noticable.
Now, I would like to trade this set for a set of LS meshes, some GSR blades, or something of that nature as long as it comes with tires. I can probably add a lil bit of cash if needed. Pics are availble upon request and I can send them via cell phone. Thanks for looking.

Last edited by importfanatic; Jun 11, 2009 at 09:00 PM. Reason: added info
Old May 26, 2009 | 03:24 PM
  #2  
importfanatic's Avatar
Thread Starter
Grippin the Grain
 
Joined: Jan 2008
Posts: 610
Likes: 0
From: The R
importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic
Default Re: Want to trade for some ls meshes

Bump
Old May 27, 2009 | 05:47 PM
  #3  
importfanatic's Avatar
Thread Starter
Grippin the Grain
 
Joined: Jan 2008
Posts: 610
Likes: 0
From: The R
importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic
Default Re: Want to trade for some ls meshes

Top
Old Jun 3, 2009 | 01:45 PM
  #4  
importfanatic's Avatar
Thread Starter
Grippin the Grain
 
Joined: Jan 2008
Posts: 610
Likes: 0
From: The R
importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic
Default Re: Want to trade for some ls meshes

Bump
Old Jun 7, 2009 | 04:44 PM
  #5  
importfanatic's Avatar
Thread Starter
Grippin the Grain
 
Joined: Jan 2008
Posts: 610
Likes: 0
From: The R
importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic
Default Re: Want to trade for some ls meshes

tops
Old Jun 9, 2009 | 03:23 PM
  #6  
importfanatic's Avatar
Thread Starter
Grippin the Grain
 
Joined: Jan 2008
Posts: 610
Likes: 0
From: The R
importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic
Default Re: Want to trade for some ls meshes

bump
Old Jun 9, 2009 | 06:08 PM
  #7  
DURHUR's Avatar
Banned
 
Joined: Mar 2008
Posts: 3,624
Likes: 0
From: Salem,Va
DURHUR is infamous around these partsDURHUR is infamous around these partsDURHUR is infamous around these partsDURHUR is infamous around these partsDURHUR is infamous around these partsDURHUR is infamous around these partsDURHUR is infamous around these partsDURHUR is infamous around these partsDURHUR is infamous around these partsDURHUR is infamous around these partsDURHUR is infamous around these parts
Default Re: Want to trade for some ls meshes

Trade for polished gsr blades?
Old Jun 11, 2009 | 09:01 PM
  #8  
importfanatic's Avatar
Thread Starter
Grippin the Grain
 
Joined: Jan 2008
Posts: 610
Likes: 0
From: The R
importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic
Default Re: Want to trade for some ls meshes

bUmP iT
Old Jun 13, 2009 | 03:17 AM
  #9  
importfanatic's Avatar
Thread Starter
Grippin the Grain
 
Joined: Jan 2008
Posts: 610
Likes: 0
From: The R
importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic
Default Re: Want to trade for some ls meshes

top
Old Jul 2, 2009 | 11:33 AM
  #10  
importfanatic's Avatar
Thread Starter
Grippin the Grain
 
Joined: Jan 2008
Posts: 610
Likes: 0
From: The R
importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic importfanatic
Default Re: Want to trade for some ls meshes

bump



All times are GMT -8. The time now is 01:22 PM.