wtt 91 crx poor mans type r - 3k on motor
ive had this in the for sale section for a while. ill try here in the wtt section. i will need something that a 3 yr. old and a new born caan sit comfortably. so it will HAVE to be a 4 door.
Name: Tim
Location: hpt
contact:757-593-8756
Year: 1991
Model: honda crx hf
Mileage: chassis unknown motor 1800 and counting
price - 6,000 obo will take trades
**fresh inspection as of 7/08**
Motor - top end
00 B16 Head stock with new valve stem seals
red ITR valve cover
aebs intake manifold powdercoated silver
skunk 2 adj. cam gears
aem adj. fuel pressure regulator
new spark plugs and wires
venom fuel rail
**forgot to add it has gsr cams in it**
Bottom end
gsr block bored .20 over
low compression pistons (cant remember brand-was gona boost it eventually)
brand new oil pump from honda
new water pump
new tensioner
new timing belt
Civic Type R crank pulley
powdercoated oil pan - red
new rings
new bearings for crank and rods
brand new oil pick up
brand new oil windage tray
brand new starter from napa
B&M fuel pressure gauge in engine bay
New gaskets Top to bottom.
transmission
stock ls tranny - cable
car
Paint is 5 months old. car was red but everything was switched to black no cheap paint job.
new upper control arms for a da integra
new outter tie rod ends (i have the inners too but not installed)
new ball joints
new brakes and rotors from brembo
da integra front and rear brakes
upper and lower strut sway bars
avid racing traction bars
aeromotive motor mounts
brand new clutch cable from honda
brand new type r accelerator and bracket from honda
custom cluster with autometer gauges
speedometer
tach
water temp
oil pressure
gas level
boost
volts
air/fuel
sparco steering wheel with momo hub
mint condition climate control (crx's usually break pretty easily)
knock off recaro seats with custom seat brackets
brand new carpet
recarpeted everything in the rear of the car
custom cargo cover
zc carbon fiber hood with sparco hood pins
bought brand new avid shift linkage
bought brand new skunk 2 shifter and shift knob
custom fit half sized radiator
tokiko 5 way adj struts in the fron with lowering springs (have skunk 2 coilovers to go with it)
tokiko blue struts in the rear with skunk 2 coilovers
car is converted to obd1
car has a stock obd1 p72 ecu
lots of powdercoated brackets in the engine bay
powdercoated wiper arms front and rear
new Front lip from honda
new window mouldings from honda










if i trade for another honda/acura i am keeping my wheels and tires.
updated parts list
new wheel bearings in the front
new lug studs all 16 of them.
brand new stage 2 clutch from xtd. grabs pretty good. was put in time of motor built so it has same amount of miles as the motor.
fidanza light weight flywheel
new throw out bearing
arp head studs
new heater core
ac has been permanetly removed from car.
tranny shift through all gears fine even at high rpms
bought 3 or 4 quarts of manual tranny fluid from honda when i filled it up
has an ek arm rest installed. fits pretty good.
may need blower motor. makes alot of noise when heat is on (motor stopped making noise- heat still works good)
oil leak from distributor side of motor(vtec sylanoid leaking. put a new one on today will look to c if it leaks)
front end makes some noise with the traction bars installed. (front end stopped making noise)
no seat belt by the seats i need to go get some from pick and pull. (seat belts installed)
Name: Tim
Location: hpt
contact:757-593-8756
Year: 1991
Model: honda crx hf
Mileage: chassis unknown motor 1800 and counting
price - 6,000 obo will take trades
**fresh inspection as of 7/08**
Motor - top end
00 B16 Head stock with new valve stem seals
red ITR valve cover
aebs intake manifold powdercoated silver
skunk 2 adj. cam gears
aem adj. fuel pressure regulator
new spark plugs and wires
venom fuel rail
**forgot to add it has gsr cams in it**
Bottom end
gsr block bored .20 over
low compression pistons (cant remember brand-was gona boost it eventually)
brand new oil pump from honda
new water pump
new tensioner
new timing belt
Civic Type R crank pulley
powdercoated oil pan - red
new rings
new bearings for crank and rods
brand new oil pick up
brand new oil windage tray
brand new starter from napa
B&M fuel pressure gauge in engine bay
New gaskets Top to bottom.
transmission
stock ls tranny - cable
car
Paint is 5 months old. car was red but everything was switched to black no cheap paint job.
new upper control arms for a da integra
new outter tie rod ends (i have the inners too but not installed)
new ball joints
new brakes and rotors from brembo
da integra front and rear brakes
upper and lower strut sway bars
avid racing traction bars
aeromotive motor mounts
brand new clutch cable from honda
brand new type r accelerator and bracket from honda
custom cluster with autometer gauges
speedometer
tach
water temp
oil pressure
gas level
boost
volts
air/fuel
sparco steering wheel with momo hub
mint condition climate control (crx's usually break pretty easily)
knock off recaro seats with custom seat brackets
brand new carpet
recarpeted everything in the rear of the car
custom cargo cover
zc carbon fiber hood with sparco hood pins
bought brand new avid shift linkage
bought brand new skunk 2 shifter and shift knob
custom fit half sized radiator
tokiko 5 way adj struts in the fron with lowering springs (have skunk 2 coilovers to go with it)
tokiko blue struts in the rear with skunk 2 coilovers
car is converted to obd1
car has a stock obd1 p72 ecu
lots of powdercoated brackets in the engine bay
powdercoated wiper arms front and rear
new Front lip from honda
new window mouldings from honda










if i trade for another honda/acura i am keeping my wheels and tires.
updated parts list
new wheel bearings in the front
new lug studs all 16 of them.
brand new stage 2 clutch from xtd. grabs pretty good. was put in time of motor built so it has same amount of miles as the motor.
fidanza light weight flywheel
new throw out bearing
arp head studs
new heater core
ac has been permanetly removed from car.
tranny shift through all gears fine even at high rpms
bought 3 or 4 quarts of manual tranny fluid from honda when i filled it up
has an ek arm rest installed. fits pretty good.
may need blower motor. makes alot of noise when heat is on (motor stopped making noise- heat still works good)
oil leak from distributor side of motor(vtec sylanoid leaking. put a new one on today will look to c if it leaks)
front end makes some noise with the traction bars installed. (front end stopped making noise)
no seat belt by the seats i need to go get some from pick and pull. (seat belts installed)
ur thread title says 3k on motor, and in ur description is says 1800 and counting? j/w whats up with that. I have a '96 civic stock other then being lowered, has AC/ P/s C/C etc. It's an EX model so has all power options, interior is VERY CLEAN 9/10 exterior is decent, would say a 7/10 as it has dings/dents/scratches etc. it's original paint etc. PM me if interested in working something out
ur thread title says 3k on motor, and in ur description is says 1800 and counting? j/w whats up with that. I have a '96 civic stock other then being lowered, has AC/ P/s C/C etc. It's an EX model so has all power options, interior is VERY CLEAN 9/10 exterior is decent, would say a 7/10 as it has dings/dents/scratches etc. it's original paint etc. PM me if interested in working something out
hell no!!!! i looked all day saturday for it. i ended up goin to dmv on monday and getting a duplicate title. so i do have the title now.
i will get that piece that your missing and covering up with blue painters tape done tomorrow...i actually saw it today and was like ...fuck i need to get that back to tim....so i will do it in the morning and holla at you later on...
haha thanks. i know i still owe you some money for painting the engine bay for me but things are really really tight right now.






