SirKendall

Sup, guys!

Just got a quick question and I'm sure someone here can answer it promptly.

I'm trying to replace my Clutch in my 89' Honda Civic with a B18A1 swapped motor.
The guy that i bought the car from ensured me that thetransmission was from a 1991 Acura Integra
however, when i purchased the clutch kit the '91 clutch plate did not fit, the splines were the right count for the shaft however, the diameter was too small and wouldn't slide onto the shaft. Then i exchanged that
clutch kit for a 89 which i had the same problem. Lastly, after comparing dimeters i went for a 93 integra clutch kit because it showed that the diameter was larger, but when i compared it to the current cluth plate the disc diameter wasn't even the same size. So we decided to get theactual part number and try to cross-check it.

the part number is

08-800A-HF01

This is a picture of what my clutch plate looks like...

http://thumbs1.ebaystatic.com/d/l225...gGQ3gUupLw.jpg

So if you could tell me what year integra my clutch(plate) is from, i would greatly appreciate it.
Thanks for the help

83Stang5.0

Matches an Exedy "sport" clutch

http://www.clutchcityonline.com/look...p?part=08-800A

SirKendall

Would you happen to know the year of the teg it's from?

83Stang5.0

http://honda-tech.com/showthread.php?t=2872192

Guy there says he uses the 08-800 for all 3 of this YS1 cable trannys. If thats what you had before, then it should be the same. On the clutchcity link I posted, I had to put 93 instead of 91 for the 08-800 to be listed, so I'd assume 93 would work just fine.

Karma

You got a b18a1 motor but what transmission do you have? Thats what your going to have to go by so you can purchase the right clutch disc for the input shaft.

SirKendall

Well yes, that's the percise issue, i don't know what transmission i have.
The guy who sold me the car said it's from a 1991 Acura integra, but teh clutch i got for that year
did not fit.

hence my confusion.

Karma

Oh gotcha ok. So the trans does not have the ID label on it?

SirKendall

Well, i can't get to the car as of right now, but we were able to get that ^ part number from the transmission.

But when i do inspect, where should i look in order to find said label?

Karma

If the 91 clutch disc wouldnt fit on the shaft the 92+ clutch disc should fit then make sure its a clutch disc for a 92 cable trans and it should work.

Karma

Should be a white label w/ letters and numbers on left side of trans on top.