TPS CALIBRATION PROBLEM
01-17-2011, 04:19 PM
#1
Registered Member
Thread Starter
Join Date: Jun 2009
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
TPS CALIBRATION PROBLEM
Name: Jeff
Problem: I put TPS on B16A2 and calibrated the TPS closed to 0.48V thats as far as it would go, and wide open Throttle body is ONLY 3.6V Should be 4.5 to 5.0V!!!PLEASE GIVE FACTS OF WHAT IT MAY BE
Thank you guys for ALL the helpful info!!!!!
:wors hip:
Problem: I put TPS on B16A2 and calibrated the TPS closed to 0.48V thats as far as it would go, and wide open Throttle body is ONLY 3.6V Should be 4.5 to 5.0V!!!PLEASE GIVE FACTS OF WHAT IT MAY BE
Thank you guys for ALL the helpful info!!!!!
:wors hip:
01-17-2011, 04:26 PM
#2
Registered member
Join Date: Jan 2003
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
Re: TPS CALIBRATION PROBLEM
yes WOT should be 4.5 to 5 volts. with the throttle plate closed the tps should be reading .45 volts. Are you rotating the throttle arm by hand or the gas pedal ? If you are rotating it with the gas pedal it sounds like you need to tighten the throttle cable.
01-17-2011, 05:39 PM
#8
Stiff Member
Join Date: Jan 2006
Location: NorVA
Posts: 1,265
Likes: 0
Received 0 Likes
on
0 Posts
01-17-2011, 05:50 PM
#10
Stiff Member
Join Date: Jan 2006
Location: NorVA
Posts: 1,265
Likes: 0
Received 0 Likes
on
0 Posts