94EGnCoupe

hey im thinkin of puttin a integra dash and center console into my eg ..what exactly do i have to do to get it to work and look good. without flaws....

Qwiksillva

First off, you would probably need a lot of fiberglass to fabricate a lot of things that are not gonna fit perfectly.

00civichatch

ummm. no. stick to your rotors.

it fits and almost bolts right in and you need to use the integra wiring harnessess. i believe you use your stock civic door panels. there are 2 threads on honda-tech.com about this. search button is your friend. good luck, and post pics.

94EGnCoupe

yea someone told me that i can use my civic door panels, but id have to mold them, but ill check that forum out

Whtehnda93DXSdn

Get yourself the teg dash and wiring harness..You will have to wire up the cluster and a few other items. On HT there is a good write up from a guy that just did this and it came out looking very nice.
As for the door panels you can opt to work w/ them to fit or as I have seen done heat up the plastic door panel where the dash is and then pushed the door shut to form the door panel to teg dash.
Good luck and it is a very nice mod if done right...

94EGnCoupe

yea everytime ive seen it it is a sick mod...yea ill give it a shot, but check into HT first

Don

Here's one with the integra speedo and center console.

94EGnCoupe

yea man that shit looks good.. i know someone lettin go a teg dash and type r center console i want to put in the eg after i paint it

.eric.

http://www.honda-tech.com/zerothread?id=1211255

94EGnCoupe

exactly what i needed to get this done, thanks man