some honda questions for the d series
02-05-2004, 07:13 PM
#1
Registered Member
Thread Starter
Join Date: Apr 2003
Location: chesapeake
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
some honda questions for the d series
ok got a d16y7 in my 93 hatch w boost trying get the most out of it what all can u do. i am all ready running 12psi looking for a good sugestion on anything. also just picked up a intake manifold of a z6 to get some air flow. but anything else i would be greatfull
02-06-2004, 03:42 AM
#2
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
Re: some honda questions for the d series
well a nice light weight flywheel would improve spool up. i would look into an aftermarket cam designed for boosted applications. what turbo are you running? is the motor stock? i need to know a little more in order to give a more educated opinion.
02-06-2004, 09:19 AM
#3
Retired OG
Join Date: Nov 2002
Location: The OC, Cali
Posts: 6,398
Likes: 0
Received 0 Likes
on
0 Posts
Re: some honda questions for the d series
Cool i have a boosted D16Y7 too. I got stock internals running 7psi now.
Getting ready to install my Y8 Ported Manifold,450cc DSM injectos, and being Tuned by Hondata. Should be able to run 10-12psi easily.
I sugguest you get a Hondata 3B system. You can find them for cheap on Honda-Tech.com
Also upgraded Injectos would help too.
Getting ready to install my Y8 Ported Manifold,450cc DSM injectos, and being Tuned by Hondata. Should be able to run 10-12psi easily.
I sugguest you get a Hondata 3B system. You can find them for cheap on Honda-Tech.com
Also upgraded Injectos would help too.
02-06-2004, 11:08 AM
#4
E for Engourged.
Join Date: Nov 2002
Location: oDU.
Posts: 3,512
Likes: 0
Received 0 Likes
on
0 Posts
Re: some honda questions for the d series
upgrade everything....i have a sleeved block, forged pistons and rods, fuel rail, fuel pump, RC 400cc injectors, fidanza flywheel and once i get hondata the sky is the limit 
Do it right.
Do it right.
02-06-2004, 12:58 PM
#5
Registered Member
Thread Starter
Join Date: Apr 2003
Location: chesapeake
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Re: some honda questions for the d series
well so far i have done fuel rail, injectors, cam gear, y8 manifold, msd, afc, turonetics t3 w/super 60 wheel and ported exhaust side, front mount, and some others but all dont come to mine right of hand
Thread
Thread Starter
Forum
Replies
Last Post