safe to turbo 95gsr??
#1
Registered Member
Thread Starter
Join Date: Jun 2007
Location: FREDERICKSBURG
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
safe to turbo 95gsr??
ok first off i have a 1995 gsr..
im the 2nd owner of this car..1st owner was a middle age cupple female driven.
it just rolled 175,2xx i was wondering if i could turbo it safely at like 5-7psi...for a daily driver??? i want reliabillity out of it dont have enought $$$ to bulid the motor right now...
im the 2nd owner of this car..1st owner was a middle age cupple female driven.
it just rolled 175,2xx i was wondering if i could turbo it safely at like 5-7psi...for a daily driver??? i want reliabillity out of it dont have enought $$$ to bulid the motor right now...
#3
Re: safe to turbo 95gsr??
If you absolutely have to have boost, trade in the car or sell it and get yourself a SRT or any other stock boosted vehicle that will be covered by a warranty.
Harsh sounding I know, but truth..
#5
Re: safe to turbo 95gsr??
just take steps to make sure you do it right.
possible steps -
a) compression check
b) new head gasket
c) proper tune
i could keep a list going, but if you take the correct steps and everything checks out, it should be fine.
possible steps -
a) compression check
b) new head gasket
c) proper tune
i could keep a list going, but if you take the correct steps and everything checks out, it should be fine.
#8
Registered Member
Thread Starter
Join Date: Jun 2007
Location: FREDERICKSBURG
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Re: safe to turbo 95gsr??
i have enough money to boost just not enough i bulid bottom and top end
i done a compression test same all the way across also
i done a compression test same all the way across also
#9
#10
braap braap
Join Date: Jul 2003
Location: Portsmouth
Posts: 14,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: safe to turbo 95gsr??
Only thing headwise I would do is new seals and maybe some valve springs and retainers. Maybe a Mill.
Bottom end. Have fun
Turbo kit. Don't be ghetto. My old kit had roughly 900 bucks into it and I had alot of quality parts.
Get a good tuner. I can name off 3. Shad. Patrick at MRD. Matt Shue.