Rotary won't start.
08-01-2005, 09:27 AM
#1
Registered Member
Thread Starter
Join Date: Jan 2005
Location: Chesapeake
Posts: 2,098
Likes: 0
Received 0 Likes
on
0 Posts
Rotary won't start.
okay. everything in my car is now in place. i'm getting spark, i'm injecting fuel, i have compression, and i have no vacuum leaks, but yet the rx-7 refuses to start. I have checked my fuses & wiring and the fuses are fine and from my knowledge, the wiring is correct. my ecu is fairly new as well. can anybody think of what could be causing this?
08-01-2005, 09:50 AM
#4
Registered member
Join Date: Nov 2004
Posts: 6,252
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rotary won't start.
Originally Posted by Qwiksillva
okay. everything in my car is now in place. i'm getting spark, i'm injecting fuel, i have compression, and i have no vacuum leaks, but yet the rx-7 refuses to start. I have checked my fuses & wiring and the fuses are fine and from my knowledge, the wiring is correct. my ecu is fairly new as well. can anybody think of what could be causing this?
Check your grounds. How much compression do you have?
Is it possible for your timing to be way off?
Thread
Thread Starter
Forum
Replies
Last Post