porting Q's
Thread Starter
NA No V-tec D
Joined: Nov 2002
Posts: 378
Likes: 0
From: d-series>k-series
porting Q's
ok so i have a 5 series 13b mazda motor all i want to know is where can i take my head to get ported?? also i cant seem to find any rods for this motor too, any ideas?
Registered Member
Joined: Dec 2002
Posts: 2,941
Likes: 0
Re: porting Q's
HAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAH AHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAH AHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHA HAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAh AAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAH AHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHA HAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHA HAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAH AHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAH AHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHA HAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAh AAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAH AHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHA HAHAhAAHAHAHAHA
*breathe*
HAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAH AHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAH AHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHA HAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAh AAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAH AHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHA HAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHA HAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAH AHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAH AHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHA HAHAHAHAHAHAHAhAAHAHAHAHA
*breathe*
HAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAH AHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAH AHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHA HAHAHAHAHAHAHAhAAHAHAHAHA
*passes out*
u>ghSEIAUFhgiESHgiufgtfh:gf
*breathe*
HAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAH AHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAH AHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHA HAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAh AAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAH AHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHA HAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHA HAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAH AHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAH AHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHA HAHAHAHAHAHAHAhAAHAHAHAHA
*breathe*
HAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAH AHAHAHAHAhAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAH AHAHAHAHAHAHAHAHAHAHAHAHAHAHAhAAHAHAHAHAHAHAHAHAHA HAHAHAHAHAHAHAhAAHAHAHAHA
*passes out*
u>ghSEIAUFhgiESHgiufgtfh:gf
Custom User Title
Joined: Mar 2003
Posts: 4,084
Likes: 0
From: Beautiful New Hampshire
Re: porting Q's
HAHAHAHAHAHAHA Thats pretty good, you almost tricked me until I read what kind of motor it is one more time 
Before you port and polish the head you may want to consider upgrading some stuff:
Cams
Pistons and rings
maybe go with bigger valves
Before you port and polish the head you may want to consider upgrading some stuff:
Cams
Pistons and rings
maybe go with bigger valves
Thread
Thread Starter
Forum
Replies
Last Post
