Nippon Racing Pistons
04-30-2006, 12:39 PM
#1
Registered Member
Thread Starter
Join Date: Aug 2003
Location: Hampton
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Nippon Racing Pistons
Anyone ever used or heard of these?
info from ebay auction:
#
NIPPON RACING PERFORMANCE DOHC 7MGTE TOYOTA SUPRA PISTONS
# FITS 87-93 7MGTE TOYOTA SUPRA TURBO MOTORS
# WRIST PINS HAVE BEEN UPGRADED FROM FACTORY TO 9310 CASE HARDENED STEEL UNITS
# THIS KIT COMES WITH FLOATING PINS AND NEW CLIPS
# AVALABLE IN std, .020 and .040 OVERSIZED
# COMES WITH PERFORMANCE NIPPON RACING CHROM RINGS
# THESE CHROME RINGS ARE FAR SUPERIOR TO THE FACTORY TOYOTA CAST RINGS
# PISTONS AND PINS HAVE BEEN Cryogenically Treated FOR EXTRA STRENGTH
# GREAT ALTERNATIVE TO EXPENSIVE FORGED UNITS
* THESE PISTONS CAN HOLD UP TO 650 HP IN A PROPERLEY TUNED ENGINE DUE TO THE RECENT IMPROVEMENTS IN METALURAGY, SO WHY PAY TO MUCH MONEY FOR FORGED UNITS THAT YOU WILL NEVER NEED FOR A STREET VEHICLE??
*
I have avalable KING Racing rod and main bearings ( check my other auctions) to put in while you are having the pistons pressed on the rods. I can get bearings made by KING. They have been making bearings for FORMULA 1 and NASCAR for over 40 years now. There new bearings are made with a new tri-metal smelting process and are silicon coated. With the new metal process and the silicon these bearings have much better properties than factory OEM. With the silicon the bearings will wear high spots and fill low spots and form a more concentric circle. These bearings are good to 1400 degrees rather than O.E.M. 400 degrees. This would make a good upgrade while you have the motor apart.
info from ebay auction:
#
NIPPON RACING PERFORMANCE DOHC 7MGTE TOYOTA SUPRA PISTONS
# FITS 87-93 7MGTE TOYOTA SUPRA TURBO MOTORS
# WRIST PINS HAVE BEEN UPGRADED FROM FACTORY TO 9310 CASE HARDENED STEEL UNITS
# THIS KIT COMES WITH FLOATING PINS AND NEW CLIPS
# AVALABLE IN std, .020 and .040 OVERSIZED
# COMES WITH PERFORMANCE NIPPON RACING CHROM RINGS
# THESE CHROME RINGS ARE FAR SUPERIOR TO THE FACTORY TOYOTA CAST RINGS
# PISTONS AND PINS HAVE BEEN Cryogenically Treated FOR EXTRA STRENGTH
# GREAT ALTERNATIVE TO EXPENSIVE FORGED UNITS
* THESE PISTONS CAN HOLD UP TO 650 HP IN A PROPERLEY TUNED ENGINE DUE TO THE RECENT IMPROVEMENTS IN METALURAGY, SO WHY PAY TO MUCH MONEY FOR FORGED UNITS THAT YOU WILL NEVER NEED FOR A STREET VEHICLE??
*
I have avalable KING Racing rod and main bearings ( check my other auctions) to put in while you are having the pistons pressed on the rods. I can get bearings made by KING. They have been making bearings for FORMULA 1 and NASCAR for over 40 years now. There new bearings are made with a new tri-metal smelting process and are silicon coated. With the new metal process and the silicon these bearings have much better properties than factory OEM. With the silicon the bearings will wear high spots and fill low spots and form a more concentric circle. These bearings are good to 1400 degrees rather than O.E.M. 400 degrees. This would make a good upgrade while you have the motor apart.
05-02-2006, 05:40 AM
#3
Registered Member
Thread Starter
Join Date: Aug 2003
Location: Hampton
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nippon Racing Pistons
i got myself a set of those rod and main bearings for my supra also. i got the pistons, i havent really found any info on the net but this seller on ebay has almost perfect feedback, so i guess i'll take the chance.
Thread
Thread Starter
Forum
Replies
Last Post