CTR

hi guy i've a honda find out thats TM tensioner start going bad ,i dont have air tool to lossen the crank bolt so any one around VA beach that can help me taking that bolt off plzz LMK
thx for any help tony

DORKO

you definitely need air power.

Hatch Man(GsR)

just take it up to a shop and ask one of the techs to help you out.

Kris.Is.Foamin

A few suggestions.




1. Big fucking hammer.

2. Jack handle on your tool?

3. Google.com

PoS hYbRiD

you really need an impact. If not sometimes a long ass breaker bar will work and i mean long. But watch out cause you will break some ratchets too using breaker bar

MajorsEF

u better hit the gym, you don't need power tools..those shits are over rated lol

B-Well

yeah, Just fuckin bite the bolt off. don't let the bolt win.

95MustangGT

yeah ima go with, if you dont have power tools a long long breaker bar, don't round the bolt off or your done for!

but you minds well save up and get power tools, because you dont want to put that thing back on with a breaker bar. be safe with power tools

CTR

i take everything apart but now found out the key thats go into the crank to stop crank pully spinning ( hope u guy understand what im saying i really need that part now ,and also need the crank pully
need to get this thing done people ........help help help
if anyone in here have that dang thing plzzzzzz plz plzzzzz lmk
thax 4 any help HAVE A GREAT NIGHT

fascelica

my crank bolt was stuck and i had to try 3 different guns before one of them broke it loose...

without air, it's almost impossible to hold the crank while attempting to unscrew the bolt.