can anyone lend a hand change the springs and valves from a damaged head to a newer one? ill be glad to pay a fair price and provide consumable goods for the work.
contact me
Dj or Jay
7573893622
located in Chesapeake near the Va Beach and Norfolk border

 

just get a bar and do it yourself. all you have to do is press down the spring just enough to get he locks off. i took a wrench and stepped on it and put a magnet to the locks. but i didnt put them on anything. so i dont know how to do that though. lol

 

^^Not that easy. You’re best bet is to find a used head and rebuild it. What type of engine is it? I have a head for as b18b1 you can have for $25.

 

how new is the head does it need to be rebuilt

 

120k on it. Got a used one rebuilt when I did a timing belt on my sisters integra. Would just have it checked out, but can't see any bent valves.

 

so is it rebuilt and ready to be installed or what and does anyone kno what size torque wrench i need and where i might be able to get one(i know you'll probably say an auto store but right now money is tight and i dont have cash to throw awy like that)

 

i have a b18b ls motor with roughly 108k on it

 

I'm 95% sure my head has no issues, any shop should be able to check it out and even change the valve seals (although the head didn't smoke) for around $40-$60. What do you mean size torque wrench? I'm almost positive the head bolts are 15mm. MAKE SURE YOU USE A 6 POINT SOCKET. PREF AN IMPACT SOCKET. Grab a hellacious cheater bar, make sure you're using a decent wrench, and go to town to get it off. As far as torque specs for the head botls, I'll have to check, I have them in a book back at the place (still at work)

 

did you get that info yet

 

2 Seconds on google.
http://www.hondahookup.com/manuals/