so my rear lcas finally came in, but i was thinking they would come with bolts. since the whole reason i purchased new ones was because the bolts in mine are frozen.

but i was wondering if anyone can tell me the size of these bolts plus the inner one.. and if you've replaced them, where you got them. honda should have them right? just need size.. found this pic off ht.

number 15 on this pic



and the other lca bolt. well the inner and outer, might as well.

thanks in advance.

 

Its a 14mm bolt. They often freeze up inside the bushing. Before doing the install, go to honda and buy two new bolts because they will most likely break. It is VERY common on honda's for these to become frozen and rip the inner sleeve on the bushing free of the bushing itself. I've had to cut several stock rear strut ears off just to remove them and the LCA's.

 

I probably has some laying around. PM me and you can come by and take a look.

 

Yeah did mine about a month ago and the zig wheel came in handy. 14mm bolts.

 

Dude, hit me up on AIM, the same shit happened to me on my hatch. I may even have some bolts you can have

EDIT: AIM s/n is fasternu8

 

woo thanks for your help guys.