Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

koni yellow/gc problem

Thread Tools
 
Old 07-23-2009, 02:34 PM
  #1  
Banned
Thread Starter
 
civickid03's Avatar
 
Join Date: Feb 2008
Posts: 532
Likes: 0
Received 0 Likes on 0 Posts
civickid03 has disabled reputation
Default koni yellow/gc problem

using koni yellows from a DC integra - shocks
using civic ground control coilovers w/springs

After installing the rear koni yellows from a DC integra the rear spring doesnt even
touch the tophat with the coilovers adjusted all the way up. Are GC shocks notorious for this or is this a improper setup. I have other sets of civic springs I can use which are longer but seem to ahve more coils near the top. Here are some pictures. THe tokicos were my old setup in the rear:

tried to get the spring rates eibach wouldnt give them 2 me.. they said 25 percent
stiffer than stock lol



no preload?



rear dc koni yellow w/rear gc



dc koni w/gc vs old tokico rear setup



dc koni w/gc vs koni w/ eibach spring for dc (how i bought them)


trying to make this setup work with the sets of springs that i have. i heard integra shocks have a height difference in the rear...maybe this setup is ok once the suspension compresses? im not the expert
civickid03 is offline  
Old 07-23-2009, 02:40 PM
  #2  
Dickbutt #peentip
 
Kris.Is.Foamin's Avatar
 
Join Date: Jan 2007
Location: Virginia Beach
Posts: 10,256
Likes: 0
Received 0 Likes on 0 Posts
Kris.Is.Foamin Kris.Is.Foamin Kris.Is.Foamin Kris.Is.Foamin Kris.Is.Foamin Kris.Is.Foamin Kris.Is.Foamin Kris.Is.Foamin Kris.Is.Foamin Kris.Is.Foamin Kris.Is.Foamin
Default Re: koni yellow/gc problem

Yep, that's how they are!

Throw em' on there. You can then raise the car up to adjust height. (and please put it on jackstands when adjusting, it's simple and dumb- but you're putting your arms inside the wheel well to adjust the height,. and I've seen many a jack let go)
Kris.Is.Foamin is offline  
Old 07-23-2009, 02:49 PM
  #3  
All Motor All Day
 
BuddyClubCivic's Avatar
 
Join Date: Jan 2003
Location: Newport News
Posts: 295
Likes: 0
Received 0 Likes on 0 Posts
BuddyClubCivic has disabled reputation
Default Re: koni yellow/gc problem

Also, some coilovers will come with a bushing for the top of the spring to prevent the spring moving from side to side. You may want to look into these if you have any problems.
BuddyClubCivic is offline  
Old 07-23-2009, 03:34 PM
  #4  
ermahgerd
 
bumada's Avatar
 
Join Date: Oct 2006
Location: Va Beach
Posts: 2,758
Likes: 0
Received 0 Likes on 0 Posts
bumada bumada bumada bumada bumada bumada bumada bumada bumada bumada bumada
Default Re: koni yellow/gc problem

the weight of the car will settle everything in place.

and im surprised eibach wasnt helpful to you because when i ordered mine, the guy was asking what i was using the suspension for and gave me his opinion on what spring rates to use.

Last edited by bumada; 07-23-2009 at 03:37 PM.
bumada is offline  
Old 07-23-2009, 04:03 PM
  #5  
Banned
Thread Starter
 
civickid03's Avatar
 
Join Date: Feb 2008
Posts: 532
Likes: 0
Received 0 Likes on 0 Posts
civickid03 has disabled reputation
Default Re: koni yellow/gc problem

thanks guys, should i tighten the nut on the shock once its in the car and theres preload to it or tighten it up out of the car? does that matter (besides for aligning everything)?
civickid03 is offline  
Old 07-23-2009, 04:06 PM
  #6  
Banned
 
stinks's Avatar
 
Join Date: Feb 2008
Posts: 727
Likes: 0
Received 0 Likes on 0 Posts
stinks will become famous soon enough
Default Re: koni yellow/gc problem

come inspection time youll be riding the fail boat....
stinks is offline  
Old 07-23-2009, 04:07 PM
  #7  
<3
 
elambz's Avatar
 
Join Date: Jun 2005
Location: Harlem, NY
Posts: 10,013
Likes: 0
Received 0 Likes on 0 Posts
elambz elambz elambz elambz elambz elambz elambz elambz elambz elambz elambz
Default Re: koni yellow/gc problem

Originally Posted by stinks
come inspection time youll be riding the fail boat....
Or not.
elambz is offline  
Old 07-23-2009, 04:11 PM
  #8  
Banned
Thread Starter
 
civickid03's Avatar
 
Join Date: Feb 2008
Posts: 532
Likes: 0
Received 0 Likes on 0 Posts
civickid03 has disabled reputation
Default Re: koni yellow/gc problem

Originally Posted by civickid03
thanks guys, should i tighten the nut on the shock once its in the car and theres preload to it or tighten it up out of the car? does that matter (besides for aligning everything)?
??
civickid03 is offline  
Old 07-23-2009, 04:13 PM
  #9  
<3
 
elambz's Avatar
 
Join Date: Jun 2005
Location: Harlem, NY
Posts: 10,013
Likes: 0
Received 0 Likes on 0 Posts
elambz elambz elambz elambz elambz elambz elambz elambz elambz elambz elambz
Default Re: koni yellow/gc problem

I tighten all the nuts after I've lowered the car. I do it finger tight until I put the weight of the car down.
elambz is offline  
Old 07-23-2009, 04:13 PM
  #10  
Banned
 
stinks's Avatar
 
Join Date: Feb 2008
Posts: 727
Likes: 0
Received 0 Likes on 0 Posts
stinks will become famous soon enough
Default Re: koni yellow/gc problem

yes if the spring moves with in the pearch it fails inspection...... i will scan my book and show you
stinks is offline  


Quick Reply: koni yellow/gc problem



All times are GMT -8. The time now is 04:19 PM.