Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

KA24E Misfire?

Old Feb 25, 2008 | 01:33 PM
  #1  
ShortyzKustomz's Avatar
Thread Starter
Anti "DONK"
 
Joined: Nov 2004
Posts: 1,157
Likes: 0
From: Richmond
ShortyzKustomz has disabled reputation
Default KA24E Misfire?

This is for my Hardbody project but I figured there was some SOHC KA Nissan guys that could lend a hand. My truck set for well over a year. Im back to working on it now, I got a battery in it and tried to start it, It was really hesitant and finally started, It was missing BAD, So I changed plugs. fule filter etc. And it is still missing, There is no fire on #4 cylinder, I can pull that plug wire off the dist. and nothing changes. I put a spark tester on it and it is getting spark, no GREAT but it is getting spark (Maybe time to change wires too) Im thinking it might be a fuel problem. When I changed the fuel filter, It was rusty and NASTY gas coming from both sides. Is there anywhere locally I can get the injectors cleaned etc? New ones are expensive even with my autozone discount (2nd job) Or anything else anyone can think of? Im stumped, Im gonna do a compression test here in a few mins
Old Feb 25, 2008 | 02:28 PM
  #2  
sucio7's Avatar
import mechanic
 
Joined: Aug 2005
Posts: 222
Likes: 0
From: NORFOLK
sucio7 has disabled reputation
Default Re: KA24E Misfire?

change the wire since ur spark is not that great but look into injectors clog
Old Feb 25, 2008 | 02:38 PM
  #3  
ShortyzKustomz's Avatar
Thread Starter
Anti "DONK"
 
Joined: Nov 2004
Posts: 1,157
Likes: 0
From: Richmond
ShortyzKustomz has disabled reputation
Default Re: KA24E Misfire?

I already swapped out wires from my bros truck and no change, Also already cleaned contacts on dist cap
Old Feb 25, 2008 | 03:35 PM
  #4  
Spindrift's Avatar
psycho jungle cat
 
Joined: Aug 2003
Posts: 7,124
Likes: 0
From: 757/910
Spindrift Spindrift Spindrift Spindrift Spindrift Spindrift Spindrift Spindrift Spindrift Spindrift Spindrift
Default Re: KA24E Misfire?

If it's been sitting or awhile best bet is just do a full tune up(spark plugs/wires/cap n rotor), it made a HUGE difference on my SOHC KA.
Old Feb 26, 2008 | 03:46 PM
  #5  
bluemonkey's Avatar
Registered User
 
Joined: Dec 2004
Posts: 13
Likes: 0
bluemonkey has disabled reputation
Default Re: KA24E Misfire?

fuel injector?
Old Feb 26, 2008 | 09:41 PM
  #6  
cardshark99va's Avatar
Banned
 
Joined: May 2006
Posts: 208
Likes: 0
From: chesapeake
cardshark99va is an unknown quantity at this point
Default Re: KA24E Misfire?

yank the injectors and clean em out with a plastic brush and carb cleaver or gasoline , then run a bottle of lucas injector cleaner through your tank
Old Mar 4, 2008 | 07:09 PM
  #7  
Rueben's Avatar
hungry
 
Joined: Oct 2005
Posts: 660
Likes: 0
Rueben Rueben Rueben Rueben Rueben Rueben Rueben Rueben Rueben Rueben Rueben
Default Re: KA24E Misfire?

goto pick n pull, there were a few KAE around
Old Mar 5, 2008 | 07:40 PM
  #8  
Cereal Jones's Avatar
Titanic Survivor
 
Joined: Feb 2006
Posts: 1,719
Likes: 0
From: va beach
Cereal Jones Cereal Jones Cereal Jones Cereal Jones Cereal Jones Cereal Jones Cereal Jones Cereal Jones Cereal Jones Cereal Jones Cereal Jones
Default Re: KA24E Misfire?

It's probably a fuel injector. Had that problem on both of my 240s. Luckily I found 4 for $10, and they all worked perfect. Look around, you'll find one.
And +1 for Lucas Fuel Injector Cleaner
Old Mar 5, 2008 | 08:02 PM
  #9  
dru's Avatar
dru
GUIBO!?
 
Joined: May 2004
Posts: 5,999
Likes: 0
From: Virginia Beach
dru dru dru dru dru dru dru dru dru dru dru
Default Re: KA24E Misfire?

kind of a threadjack but might help...

im supposed to swap my injectors out otmorrow.. its pretty easy to do yea? this is for a ka dohc
Old Mar 6, 2008 | 09:28 PM
  #10  
F22BJSPECACCORD's Avatar
Registered Member
 
Joined: Oct 2005
Posts: 1,122
Likes: 0
From: great bridge
F22BJSPECACCORD has disabled reputation
Default Re: KA24E Misfire?

yo shorty i'd def. agree w/ changing the injectors if they look bad, but if you change one, change them all. also cap and rotor is a good idea cuz of how long it sat without fire'n, but if it were me i'd just go ahead and change the whole dizzy, i.e. did you try to start it w/ year old gas in it? cuz thats not good, over time the octane level gets depleted that along w/ a lil dirty injector could be wuts going on... anyways good luck pimp'n!

off topic:
how the hell are you man, things going good? are you close to springfield? cuz ima be there for a eastcoast cb7 meet on the 22nd, if you are then maybe we could get up have a few drinks, shoot the shit for old times sake...

get@me,
<<>>mike james(a.k.a. sleepy)


All times are GMT -8. The time now is 05:22 AM.