Stillpushin

I have an 89 240sx with a swapped de. The motor runs great and everything. My only problem is the speedo and reverse lights don't work. I figure it is something not plugged into the tranny right or something along those lines. Can someone post the wiring diagram or whatever it is supposed to look like going into the tranny. I have already swapped out the gauge cluster for the dohc. Thankyou in advance.

BTW- I will already be posting this on shiftva.

Jesus

......

Citium2012

You're answer is waiting there.

Stillpushin

I see what you are saying but there is no empty plugs on the tranny. There is however an extra plug. I am thinking whomever originally did the swap didn't splice something or missed something. That is why i asked for a diagram or picture so i can clean it up.

Hayashi

do you have a the dohc speedometer?

Enigma

Go to the junkyard and find a DE with everything in it and take a look.. then see if there is a difference in the clusters. I'm pretty sure there isn't much difference except the SOHC to DOHC. Is yours a coupe or a hatch? Coupes have the digi speedo and the hatchies don't.

Stillpushin

I already changed it to a dohc cluster. The only thing that the new cluster changes is it reads RPM's.

duboseq

Try www.nissanforums.com www.240sx.org

Hayashi

check your tranny speed sensor.. someone could have cutted it so they cane get rid of the speed limitor... check ur fuses too

drifterJERRY

there is a switch/plug on the tranny, next to the shifter(underneath) that is the reverse switch/sensor. the two wires from it run forward to the lower engine harness.

www.freshalloy.com www.zilvia.net

not trying to be an ass, but the answers may require some searching.. do that before posting on other forums cause you prolly wont get an answer.