J30 LSD
07-06-2005, 10:25 AM
#1
Down for BOOST
Thread Starter
Join Date: Dec 2004
Location: Hampton
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
J30 LSD
I got the lsd with the car not installed but no hardware to install it with. I have went to all the local junkyards with no luck. If anyone knows the specs of the bolts and nuts so i can have them made i would greatly appreciate it.
07-06-2005, 11:40 AM
#5
Down for BOOST
Thread Starter
Join Date: Dec 2004
Location: Hampton
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: J30 LSD
Originally Posted by WYT R1CE
what year j30 lsd?
if its 95+ all you need is to replace the diff and use your 240sx end cap on the j30 diff.
if its 95+ all you need is to replace the diff and use your 240sx end cap on the j30 diff.
Not sure is there a easy way to tell?
07-06-2005, 07:50 PM
#7
Down for BOOST
Thread Starter
Join Date: Dec 2004
Location: Hampton
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: J30 LSD
Originally Posted by WYT R1CE
on the out put shafts how many bolt hole are there? if its the 95+ it will be 6 total with 2 bolts side by side.
it only has 5
07-07-2005, 06:43 AM
#10
I Sell Tires
Join Date: Sep 2003
Location: Tsukuba
Posts: 8,987
Likes: 0
Received 0 Likes
on
0 Posts
Re: J30 LSD
its the same one as mine dan. he needs all the axel bolts and the sub frame bolts.
its a 92-94 J30 LSD
if i knew it was gonna be this hard to fine the dimensions for the hardware i would had gone and got you the same ones before greaser put mine on.
before you put it on you also have to switch the diff covers so that the stock cover is on the j30. it needs to be switched in order to attatched it the sub frame. make sure u go get a paper gasket before its swapped.
its a 92-94 J30 LSD
if i knew it was gonna be this hard to fine the dimensions for the hardware i would had gone and got you the same ones before greaser put mine on.
before you put it on you also have to switch the diff covers so that the stock cover is on the j30. it needs to be switched in order to attatched it the sub frame. make sure u go get a paper gasket before its swapped.
Last edited by Spike_Spiegel; 07-07-2005 at 06:47 AM.