Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

i need help on this one

Thread Tools
 
Old Apr 2, 2006 | 06:01 PM
  #1  
cmeGTsme's Avatar
Thread Starter
its just a GSR
 
Joined: Nov 2005
Posts: 573
Likes: 0
cmeGTsme is an unknown quantity at this point
Default i need help on this one

ive got a 1994 gsr.....i got my full exaust on other day, and ever since then, at higher rpm, my car kinda hesitates......i started to rember that my o2 censor was stripped out, so i couldnt put it back on my cat......would me missin the o2 censor be reason for it hesitating??? thanks yall
Old Apr 2, 2006 | 06:07 PM
  #2  
PJ2's Avatar
PJ2
Registered Member
 
Joined: May 2003
Posts: 341
Likes: 0
From: Billisburg, Va
PJ2
Default Re: i need help on this one

It could be, the ecu is probably running on limp or safe mode and shooting lots a fuel to keep the mixture at a safe level so you're probably running too rich at the higher rpm.
Old Apr 2, 2006 | 06:37 PM
  #3  
MerF's Avatar
Ghost
 
Joined: Jul 2003
Posts: 8,841
Likes: 0
From: St Petersburg, FL
MerF MerF MerF MerF MerF MerF MerF MerF MerF MerF MerF
Default Re: i need help on this one

Yes, of course it's the reason. Replace it.
Old Apr 2, 2006 | 07:00 PM
  #4  
Boostfed's Avatar
Kimchee Wiggler
 
Joined: Nov 2002
Posts: 1,283
Likes: 0
From: Morrisville NC
Boostfed Boostfed Boostfed Boostfed Boostfed Boostfed
Default Re: i need help on this one

Edited:Got more info, Wiggles put the O2 back in!!!!!!!

Last edited by Boostfed; Apr 2, 2006 at 07:11 PM.
Old Apr 2, 2006 | 07:04 PM
  #5  
cmeGTsme's Avatar
Thread Starter
its just a GSR
 
Joined: Nov 2005
Posts: 573
Likes: 0
cmeGTsme is an unknown quantity at this point
Default Re: i need help on this one

no its
41 Heated Oxygen Sensor (HO2S) Heater.
Old Apr 2, 2006 | 07:05 PM
  #6  
Boostfed's Avatar
Kimchee Wiggler
 
Joined: Nov 2002
Posts: 1,283
Likes: 0
From: Morrisville NC
Boostfed Boostfed Boostfed Boostfed Boostfed Boostfed
Default Re: i need help on this one

Wiggles, Code 41 is 41 Primary oxygen sensor heater . Whoever did you exhaust damaged the O2 sensor , the Primary one
Old Apr 2, 2006 | 07:07 PM
  #7  
Boostfed's Avatar
Kimchee Wiggler
 
Joined: Nov 2002
Posts: 1,283
Likes: 0
From: Morrisville NC
Boostfed Boostfed Boostfed Boostfed Boostfed Boostfed
Default Re: i need help on this one

Edited:Got more info, Wiggles put the O2 back in!!!!!!!

Last edited by Boostfed; Apr 2, 2006 at 07:12 PM.
Old Apr 2, 2006 | 07:09 PM
  #8  
Boostfed's Avatar
Kimchee Wiggler
 
Joined: Nov 2002
Posts: 1,283
Likes: 0
From: Morrisville NC
Boostfed Boostfed Boostfed Boostfed Boostfed Boostfed
Default Re: i need help on this one

Put the 02 back in!!!!

Last edited by Boostfed; Apr 2, 2006 at 07:12 PM.
Old Apr 2, 2006 | 07:17 PM
  #9  
cmeGTsme's Avatar
Thread Starter
its just a GSR
 
Joined: Nov 2005
Posts: 573
Likes: 0
cmeGTsme is an unknown quantity at this point
Default Re: i need help on this one

terry, all these damn edited posts :: smh ::
Old Apr 4, 2006 | 03:56 AM
  #10  
John L.'s Avatar
Registered Member
 
Joined: Apr 2006
Posts: 25
Likes: 0
From: Blacksburg, VA
John L. has disabled reputation
Default Re: i need help on this one

That would surprise me a lot if it fixed the problem, I suppose it could lead to limp mode operation. But ECUs ignore the 02 sensor at high load/throttle, or high RPM because the input from a narrowband (stock) 02 sensor is useless at that point. So it should not have an effect on air/fuel ratio.



All times are GMT -8. The time now is 11:53 PM.