Re: How many lbs of boost should i run
yeah right real funii close tread
|
Re: How many lbs of boost should i run
close thread
|
Re: How many lbs of boost should i run
put the wg reference line n do a pull in 3rd or 4th. that will allow you to know what the car can handle n where to set it.
|
Re: How many lbs of boost should i run
10-15 to get you start. n-e-thing more then that might cause you problems
|
Re: How many lbs of boost should i run
20psi!!!!!!!
|
Re: How many lbs of boost should i run
8psi
|
Re: How many lbs of boost should i run
no matter what boost you run...its just a matter of time on stock.
|
Re: How many lbs of boost should i run
What the hell car is it? Only N/T DSMs are 9:1 stock.
The ammount of boost you can safely run is a facter of many things: Fuel volume available Fuel pump strength (can it push the pressure required for the boost) Tuning capability to safely tune for the boost Strength of the pistons/rods and much much more If you think boost doesn't mean anything then I hope you're not tuning anything. Boost creates cylinder pressure which is a direct load on the motor. CFM/airflow is NOT load. CFM makes power not load. |
Re: How many lbs of boost should i run
Originally Posted by Kurazy Kracka
(Post 3123385)
put the wg reference line n do a pull in 3rd or 4th. that will allow you to know what the car can handle n where to set it.
|
Re: How many lbs of boost should i run
Originally Posted by tknbsness
(Post 3123304)
yeah right real funii close tread
|
All times are GMT -8. The time now is 10:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands