i need some directions on how to install a cf duckbill on a 95 hatch...any one with steps please help..thanks...benny

 

somewhere along the lines of opening the hatch putting the bill up where it's supposed to go and screwing it into the hatch, im sure if you just looked at the mounting holes on the bill and look at your hatch you could figure it out unless you're really mechanically inclined...which is okay too that's why we're here anyways good luck

 

no you have to take off stock wing thingy but its held on with wires and shit after its unscrewed,,,,

 

rip the wires out, duckbills don't have a light anyway.

 

just bring it by the shop man.

 

dude, all it is is the wires for the third brake light in your stock wing, there is actually a place to unplug it, a little clip. or you could just cut the wires with enough room to splice back together if need-be.

 

Dont take it to a shop. PM me or someone else who knows they are doing and we can put it on for you. DO NOT JUST CUT THE WIRES....you need to cut them and secure them so they do not touch and ground out.

 

Fixed k thanks bye.

 

haha thanks mike....