Can you use dsm injectors with a Hondata or do you guys suggest I use aftermarket injectors with hondata? I did a search and some people say yes you can and some people say no you can't. I rather use the DSM injectors since they are cheaper. For the people with experience with HOndata let me know.

 

If you can use DSM injectors on the stock ECU, you can use them with Hondata. So that's the question you need to answer: can you use DSM injectors with the stock ECU?

 

no, because the biggest injectors civic ecu's will idle is 330's. you will still need to use a resistor box too.

 

OMG! He said Hondata, actually Hondata says the DSM injectors don't work or work well with Hondata but others have succesfully used them. It is kinda luck of the draw I guess, some have had probs with 3 bar map sensors and some haven't. I would get some aftermarket injectors Nato, I can get them for pretty cheap for you like $200. Lemme know and hit me up with any Hondata or motor questions ok

 

they probably had problems with the injectors because of the injectors themselves and just thought it was the hondata. lots of people have cold startup issues w/ the dsm 440's...

 

http://hondata.com/bb/viewtopic.php?t=432

http://www.honda-tech.com/zerothread?id=608408

http://www.honda-tech.com/zerothread?id=212482

First thread Doug from Hondata said tey don't work, others say they do, I dunno. Get some other injectors to be safe

 

shit ive got 450cc DSM injectors with resistor box and SMC fuel controlller for sale nato...if you were interested

 

Yep they said cold start up issues

 

u can get resistor box out of volvo turbo.... 240, 740,760, 940 it will be located on inside drivers 1/4 panel in engine bay... it goes from high to low impedence...

the turbo ones are peak and hold @ (89 before are 300 and 90+ are 310)
N/A are saturated

 

the only reason i suggested it is because he was considering turbo.....