HID kit only works on High beam
#2
Re: HID kit only works on High beam
The wire on the HID plug that plugs into the factory headlight harness is swapped. Should be two wires, ground and +12 volt - Swap the +12 wire to the other free spot in the plug.
#3
#4
Re: HID kit only works on High beam
http://upload.ecvv.com/upload/Produc...6171445553.jpg
Sometimes on most kits the plug at the bottom of the ballast is made wrong.
Its supposed to plug in one way with the clip but if you flip it and plug it in it should fix your problem
Sometimes on most kits the plug at the bottom of the ballast is made wrong.
Its supposed to plug in one way with the clip but if you flip it and plug it in it should fix your problem
#5
been around awhile.
Join Date: Nov 2002
Location: 757
Posts: 3,846
Likes: 0
Received 0 Likes
on
0 Posts
Re: HID kit only works on High beam
I had a set of Xenon high lows, nice kits, plug and play..took about 20min with basical tools and never had an issue.
Fabrik8 is right, you will get what you pay for.
Fabrik8 is right, you will get what you pay for.
Thread
Thread Starter
Forum
Replies
Last Post
p2r
Exterior
11
12-30-2008 03:32 AM