HELP! B-series alternator
#1
Banned
Thread Starter
Join Date: Jan 2006
Location: VA
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
HELP! B-series alternator
I have an urgent question!
Does the OBD1 to OBD2 differences in a B18A and/or B18C Honda affect the alternator assembly.
Here's my situation.
I have a B18C GSR that needs a new alternator. I have an extra one from a
B18A LS in a different location and that's my dilemma, need info to make the trip after I get some help on here. I need to know if this one will work on the GSR.
And just incase, I also have a few D-series alternators as well (D16 non vtecs)...will these work any?
THANKS GUYS!
Does the OBD1 to OBD2 differences in a B18A and/or B18C Honda affect the alternator assembly.
Here's my situation.
I have a B18C GSR that needs a new alternator. I have an extra one from a
B18A LS in a different location and that's my dilemma, need info to make the trip after I get some help on here. I need to know if this one will work on the GSR.
And just incase, I also have a few D-series alternators as well (D16 non vtecs)...will these work any?
THANKS GUYS!
#2
Fitty Tuckin
Join Date: May 2006
Location: VA's West Side - 540
Posts: 12,375
Likes: 0
Received 0 Likes
on
0 Posts
Re: HELP! B-series alternator
D-series alts will not bolt to b-series motors. B-series alts will bolt to any b-series motor. The problem is the wiring. OBD2 alts have a square plug were as the obd1 have a circle green plug. In my case I had obd2 wiring harness with square plug and I swapped a obd1 swap in my car. I cut off the square obd2 plug and rewired a green circle plug on my harness so I could use a obd1 alt that came with the swap.
#3
Banned
Thread Starter
Join Date: Jan 2006
Location: VA
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Re: HELP! B-series alternator
Originally Posted by JBee99
D-series alts will not bolt to b-series motors. B-series alts will bolt to any b-series motor. The problem is the wiring. OBD2 alts have a square plug were as the obd1 have a circle green plug. In my case I had obd2 wiring harness with square plug and I swapped a obd1 swap in my car. I cut off the square obd2 plug and rewired a green circle plug on my harness so I could use a obd1 alt that came with the swap.
I'll give that a try..
don't worry im not really tryin to rhyme
it's just that im improvising at this point in time
Thread
Thread Starter
Forum
Replies
Last Post