Head upgrade...
#1
БЛЯДЬ!
Thread Starter
Join Date: Sep 2005
Location: Up in here son
Posts: 5,940
Likes: 0
Received 0 Likes
on
0 Posts
Head upgrade...
I have a stock JDM B16A. Thinking about getting camshafts, cam gears, springs and retainers. Any suggestions? Brand and spec. I was thinking about the buddy club spec IV or V. Do I need a fuel reg since I'll be increasing the flow? Thanx.
#5
Re: Head upgrade...
m22 or m24 by rocket. nice price and mucho power. i've personally seen a b16 make 216hp and 163lbs using the m24s. (13:1 and stage 3 port, ecu tune, jdm 4-1, and stock intake mani.)
http://m24x.zeroforum.com/
http://m24x.zeroforum.com/
#6
Banned
Join Date: Oct 2005
Location: Virginia Beach, Virginia fucka
Posts: 3,258
Likes: 0
Received 0 Likes
on
0 Posts
Re: Head upgrade...
I'd say.
Skunk2 Stage3 Cams
Sk2 Valves and titanium retainers and springs
5 angle valve job
Port n polish intake mani and intake ports
Get Ecu tuned as well
Should be pretty nasty
Skunk2 Stage3 Cams
Sk2 Valves and titanium retainers and springs
5 angle valve job
Port n polish intake mani and intake ports
Get Ecu tuned as well
Should be pretty nasty
#7
Re: Head upgrade...
the skunk pro1 and 2 are the best on the market wright know i would say a pro1 for the mild b16 skunks new valve trane is really nice but is exspensive compared to the buddy club stuff you can make really good power on a all most stock head save your money and use the stock valves and have a simple port and good valve job done you will need to have it tuned that is very inportant call abacus or accuraccy they can help you out
Last edited by dahatch; 03-19-2006 at 05:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jdmontheway
Want to Buy / Trade ARCHIVE
2
04-12-2008 04:44 PM