teggi91

i need to change my timing belt for my motor(h23 head / f22b block) and i can't find the right belt.
tried taking my old timing belt to advance & autozone and they can't match up the belt either
i tried using the h23, f22vtec, gsr, and b20 timing belts but their either too big or to small.
i would try using the h22vtec belt but i think thats going to be to big
whoever has done this swap or has this swap please let me know what belt you used or what to do to make it work.

thanks

Gen_Crunchytoes

search honda tech, ive seen the answer there in a thread about assembling one of these motors.

also wrong section

DURHUR

f22a1/4/6 belt.


ZING.

teggi91

but wouldn't the f22 t-belts be shorter since its sohc? (h23head/f22bblock)

teggi91

i need to change my timing belt for my motor(h23 head / f22b block) and i can't find the right belt.
tried taking my old timing belt to advance & autozone and they can't match up the belt either
i tried using the h23, f22vtec, gsr, and b20 timing belts but their either too big or to small.
i would try using the h22vtec belt but i think thats going to be to big
whoever has done this swap or has this swap please let me know what belt you used or what to do to make it work.

thanks

DURHUR

Why do you need another thread for this same question?I answered it in the other thread.



You need the f22a1/4/6 belt.90-93 accord.

DURHUR

No.I had a frank motor that was f22b dohc bottem end and f22a sohc head and it took a sohc f22a belt.


It'd also help to know what tensioner your trying to use.

teggi91

i still have the f22 tensioner

teggi91

i just tried it it doesn't fit i have a dohc head

Dough_Boy.

Don't listen to the scammer. Can you see the numbers on the belt?