-an fittings
#1
Seh-Fee-Ro
Thread Starter
Join Date: Jan 2004
Location: yokosuka, japan
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
-an fittings
anyone know where i can get em local...i kinda need them asap...like between now and tuesday...hopefully today (sat)...any help would be greatly appreciated
this is for the oil feed line for my turbo setup btw...and im an idiot w/ the numbers so i have no idea what size i need...thats why i was hoping to be able to take it in somewhere and get help
problem is the fitting i have is a 90deg angle and i need a strait one...
like i said any help would be greatly appreciated
this is for the oil feed line for my turbo setup btw...and im an idiot w/ the numbers so i have no idea what size i need...thats why i was hoping to be able to take it in somewhere and get help
problem is the fitting i have is a 90deg angle and i need a strait one...
like i said any help would be greatly appreciated
#2
Registered User
Join Date: Aug 2005
Location: richmond/chesterfield
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: -an fittings
Call any of your local speed shops they should have a full array of fittings/hoses. I believe oil feeds should be -6 or-8an, oil drains should be as large as possible
#3
Re: -an fittings
4 AN is normally what comes in most kits. I'd say 6 is way to big for a pressure line of that sort.
If you don't have any luck at your local shops, Hampton rubber or B&B rubber (I believe the names are correct) are good options that can make the line for you. If you are in the Hampton Roads area.
Put your location in your profile and people will be able to help you better.
If you don't have any luck at your local shops, Hampton rubber or B&B rubber (I believe the names are correct) are good options that can make the line for you. If you are in the Hampton Roads area.
Put your location in your profile and people will be able to help you better.
#4
Seh-Fee-Ro
Thread Starter
Join Date: Jan 2004
Location: yokosuka, japan
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
Re: -an fittings
my bad lol yea im in norfolk
i just called millenium and performance unlimited...im gonna stop by both of their shops
do u think/know if hampton and b&b rubber is open today??
i just called millenium and performance unlimited...im gonna stop by both of their shops
do u think/know if hampton and b&b rubber is open today??
#7
Team Ultraspeed
Join Date: Nov 2002
Location: Nonya (hint: VaBch)
Posts: 1,148
Likes: 0
Received 0 Likes
on
0 Posts
Re: -an fittings
Hydra Hose on Cleveland st in Va Bch is where I go. But they will not be open until Tuesday.
You need a -4 AN for your pressure line, and atleast a -6, but perfer -8 AN for your oil return.
I'm using -10 AN on my external oil cooler.
You need a -4 AN for your pressure line, and atleast a -6, but perfer -8 AN for your oil return.
I'm using -10 AN on my external oil cooler.
#8
Seh-Fee-Ro
Thread Starter
Join Date: Jan 2004
Location: yokosuka, japan
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
Re: -an fittings
thanks everyone...ill be contacting hydra hose and hampton/norfolk rubber tuesday to see if they can help me...i got one of the fittings from millenium but i still need one more...like i said the the bad part is i dont know the size...but i do have the fitting w/ me that i need replaced
thanks again for all the info
thanks again for all the info
#9
Seh-Fee-Ro
Thread Starter
Join Date: Jan 2004
Location: yokosuka, japan
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
Re: -an fittings
ok i need to tap my block for a 1/4 NTP fitting. (this is if i cant find the adapter i need when i go searching tomorrow/tuesday/wednesday)... any body got this particular tap that i can borrow...ill pay if need be...i just want my damn car back on the road