i have a sohc vtec motor but it needs new tranny so would a dx tranny work on it and how would it run?

 

it would work just a diff gear ratio then w/ a LX/EX trans...I think the gearing is a little more spread out w/ the DX tranny then the LX/EX but not certain.

Hope that helps a bit.

 

this is from http://www.leecao.com/honda/civic/1998spec.html

Manual Trans. 5-speed
DX - LX - EX
1st Gear 3.250 3.250 3.250
2nd Gear 1.782 1.782 1.782
3rd Gear 1.172 1.172 1.172
4th Gear 0.909 0.909 0.909
5th Gear 0.702 0.702 0.702
Reverse 3.153 3.153 3.153
Auto Trans.* 4-speed* 4-speed* 4-speed*
1st Gear 2.600 2.600 2.600
2nd Gear 1.468 1.468 1.468
3rd Gear 0.926 0.926 0.926
4th Gear 0.638 0.638 0.638
Reverse 1.954 1.954 1.954
Final Drive Ratio (MT/AT) 4.058/4.357 4.058/4.357 4.058/4.357

looks like it doesn't matter to me. they're all the same.

 

thanks alot if anybody has any more info than post it thnks

 

does anybody else know if a dx tranny would lone up with a ex motor?

 

the dx tranny will bolt onto any D block...but that tranny is a fucking dog and will slow your car way the hell down......