DSM Injectors
05-01-2004, 12:51 PM
#2
Registered Member
Join Date: Oct 2003
Location: Chesapeake
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: DSM Injectors
1G and 2G are pretty much the same except for the color of the top (1G = blue, 2G = black). There are rubber sheets (spacers) on the top of the injector that make them fit though. The arrow points at the sheet im guessing you don't have.
05-02-2004, 11:11 AM
#4
Home, finally
Thread Starter
Join Date: Nov 2003
Location: Okaloosa, Florida
Posts: 2,391
Likes: 0
Received 0 Likes
on
0 Posts
Re: DSM Injectors
I tried before, but I used the stock 2g o-rings and they were too fat. So, I'm guessing I should look for some o-rings of a 1g at say, Advance... Then get some of those sheets and try again. Y'know what sucks though??? ---> I didn't know I'd have to remove my intercooler, and piping going to the intake, then the battery. I never realized you had to disconnect soooooo many things to reach the rail. On top of that you're wishing you had small hands, arms, and fingers to reach behind the mani to get to the rail. If only I had a honda or nissan, lol. Thanks for the help, and the pics were going the extra mile. I can keep my injectors now.
Last edited by Citium2012; 05-02-2004 at 11:13 AM. Reason: Forgot to add a line
05-03-2004, 09:52 AM
#8
Home, finally
Thread Starter
Join Date: Nov 2003
Location: Okaloosa, Florida
Posts: 2,391
Likes: 0
Received 0 Likes
on
0 Posts
Re: DSM Injectors
Ninety 7gsx, if you can get 'em for me, I'll pay you back for them..... I'm only boostin' 7psi, would I really need 450cc for now?? By the way, if you don't know... I'm a 420A so my fuel rail's a lil' different.
Last edited by Citium2012; 05-03-2004 at 09:53 AM. Reason: Different opinion
05-03-2004, 02:51 PM
#9
No Name Who?
Join Date: Nov 2002
Location: JMU
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
Re: DSM Injectors
What size are your stock injectors? Also are they low or high impedance? I'm gonna look up and see what I can find. Im me if you are on.
For some reason I can't picture what they look like as many as I have pulled/pulled apart I should know.
For some reason I can't picture what they look like as many as I have pulled/pulled apart I should know.
Last edited by Ninety7GSX; 05-03-2004 at 03:05 PM.
05-03-2004, 06:35 PM
#10
Home, finally
Thread Starter
Join Date: Nov 2003
Location: Okaloosa, Florida
Posts: 2,391
Likes: 0
Received 0 Likes
on
0 Posts
Re: DSM Injectors
The injectors are 270... from what 2 reputable dsm shops told me. But, I'm not sure what the impedance is though. Please do, thanks a lot... I'm at work now so I'll hit you up soon.